31 January 2008 in International Journal of Hydrogen Energy
1 July 2005 in Chemical Engineering and Processing - Process Intensification
1 September 2017 in Carbon
28 January 2011 in Environmental Technology
Magnesian calcite with controlled properties was synthesized for the removal of carbon dioxide. The results from characterization, reactivity and CO2 capture capacity for different synthesis conditions are reported. The magnesian calcite samples (CaCO3:MgCO3) were synthesized by the coprecipitation of specific amounts of commercially available CaO and MgO by carbon dioxide. Characterization was done with BET, SEM/EDS, particle size analysis and XRD. The capacity was measured using TGA cycles at 800 °C and compared for different preparation conditions. The effects of CaO, MgO and surfactant loading on the physical properties and carbonation activity were studied to determine the optimal synthesis condition. A long‐term carbonation–calcination cycling test was conducted on the optimal sample. It was observed that the sample maintained its capacity to 86% of its original uptake even after 50 cycles.
21 May 2019 in Mining Technology: Transactions of the Institutions of Mining and Metallurgy
ASA. J. S. (Sam) Spearing
Corrosion of roof bolts in underground mine environments could have an adverse impact on ground control, which is directly related to workforce safety. Past studies state that stress corrosion cracking (SCC) of roof bolts is a significant problem in underground coal mines, resulting in premature bolt failures. However, it has not been seriously studied in U.S. underground coal mines. As a preliminary study, the most common roof bolt material used in U.S. mines, ASTM A 615 Grade 60 steel, was studied under stress corrosion conditions. ASTM G30 standard was applied to achieve this and tested in the simulated coal mine conditions. SCC was observed on samples that were tested for 180 days. Chloride SCC (ClSCC) was found to be the corrosion mechanism resulting in cracks from the EDS data. This paper mainly discusses the test protocol, shortcomings of this preliminary testing and makes recommendations based on the observations and results.
19 November 2014 in Journal of Sol-Gel Science and Technology