The etching mechanism of ZrO2 thin films and etch selectivity over some materials in both BCl3/Ar and BCl3/CHF3/Ar plasmas are investigated using a combination of experimental and modeling methods. To obtain the data on plasma composition and fluxes of active species, global (0-dimensional) plasma models are developed with Langmuir probe diagnostics data. In BCl3/Ar plasma, changes in gas mixing ratio result in nonlinear changes of both densities and fluxes for Cl, BCl2, and BCl2+. In this work, it is shown that the nonmonotonic behavior of the ZrO2 etch rate as a function of the BCl3/Ar mixing ratio could be related to the ion-assisted etch mechanism and the ion-flux-limited etch regime. The addition of up to 33% CHF3 to the BCl3-rich BCl3/Ar plasma does not influence the ZrO2 etch rate, but it non-monotonically changes the etch rates of both Si and SiO2. The last effect can probably be associated with the corresponding behavior of the F atom density.
13 November 2009 in Journal of Vacuum Science & Technology A
The investigations of etch characteristics and mechanisms for indium tin oxide (In2O3)0.9:(SnO2)0.1 (ITO) thin films using HBr∕Ar inductively coupled plasma were carried out. The ITO etch rate was measured in the range of 0%–100% Ar in the HBr∕Ar mixture at fixed gas pressure (6mTorr), input power (700W), and bias power (200W). Plasma parameters and composition were examined with a combination of plasma diagnostics by double Langmuir probe and global (zero-dimensional) plasma model. It was found that the ITO etch rate follows the behavior of Br atom flux but contradicts with that for H atoms and positive ions. This suggests that the ITO etch process is not limited by the ion-surface interaction kinetics and appears in the reaction-rate-limited etch regime with the Br atoms as the main chemically active species.
In this study, we investigated the effect of surface modification on an aluminum (Al) electrode caused by plasma treatment for the output performance of a triboelectric generator (TEG). We performed the plasma-treated the surface of the Al electrode using a chlorine/argon (Cl2/Ar) gas mixture plasma to increase the surface roughness and surface energy. The fraction of Ar in the Cl2/Ar plasma was varied from 0% to 100%. The plasma was analyzed by optical emission spectroscopy and a double Langmuir probe. Measurements of the surface roughness and surface energy were performed using atomic force microscopy and the drop method with a contact angle goniometer at room temperature, respectively. The plasma treatment increased the surface roughness and surface energy of the Al electrode. After the plasma treatment, we fabricated a triboelectric energy harvester device. When treated with a pure Cl2 plasma, the short-circuit current of the TEG increased by 207% compared with that of the untreated samples.
15 October 2008 in Journal of the Korean Physical Society