Calcium aluminate layered double hydroxides (Ca-Al LDHs) constitute a considerable part of cementitious waste fines. Although cementitious waste fines have proven to be recyclable by thermal treatment at moderate temperatures (400–700 °C), understanding how each phase rehydrates and contributes to the binding properties of rehydrated cementitious materials is still necessary. In this study, the de(re)hydration of katoite is investigated through in situ techniques, and its applicability as an alternative cement or supplementary cementitious material (SCM) is discussed. The research employed X-ray diffraction, isothermal calorimetry, in situ wide-angle X-ray scattering (WAXS), and rotational/oscillatory rheometry. Katoite synthesized by a mechanochemical process was dehydrated at 400 °C, producing mainly mayenite. During rehydration, calorimetry presents high heat production in the first minutes. WAXS shows prompt recovery of katoite and increasing formation of monocarboaluminate (Ca-Al LDH) after 30 s of rehydration. The findings confirm the direct association between rapid heat release and phase reformation. Rehydrated pastes present a high yield stress and an increasing storage modulus, indicating rapid binding properties. The consolidation is also correlated with cumulative heat and monocarboaluminate formation. The results indicate the potential of calcined katoite for use as rapid set alternative cement or SCM.
Resumo A redução do consumo de cimento na composição de argamassas de revestimento é uma alternativa para a diminuição do impacto ambiental provocado na cadeia de produção do ligante. A utilização de materiais cimentícios suplementares (supplementary cementitious materials - SCM) e a dosagem com base nos conceitos de empacotamento e mobilidade de partículas são estratégias que podem resultar nas propriedades projetadas tanto no estado fresco quanto endurecido. O objetivo deste trabalho foi ilustrar a influência da alteração no consumo de ligante nas propriedades no estado fresco e endurecido de argamassas de revestimento mantendo-se constante a distribuição de tamanho de partículas, o que resultou em porosidade de empacotamento com insignificante variação. O consumo de cimento variou de 8% a 16% em massa, com adição de filler calcário como SCM, sendo que a consistência foi a mesma devido à alteração dos teores de água nas argamassas. Os resultados indicaram que a redução no consumo de cimento afeta negativamente as propriedades no estado endurecido, mas ainda assim atendem às exigências estabelecidas para esse tipo de revestimento.
1 January 2021 in Revista IBRACON de Estruturas e Materiais
Bauxite residue (BR), a by-product of alumina and aluminum production, consists of high aluminum, silica, and iron content, and sodium from the bauxite ore digestion during the Bayer process. This waste is still being disposal into the lakes of mud, causing some environmental problems. So, the search for its application has gained interest. Studies reported in literature point out that one of the most promising applications is in association with Portland cement, which can also help to reduce the environmental impact caused by the CO2-emissions in its production. In this work, a combined evaluation of oscillatory rheometry and isothermal calorimetry was performed for the monitoring of the hardening stage of Portland cement (PC) compositions blended with BR generated in different sites in Brazil. The time-sweep test was applied to obtain the consistency gain of suspensions over-time, allowing us to understand the physical parameters of consolidation, while the changes in the hydration reaction showed considerable differences in the chemical contribution. As a conclusion, it was clear the impact of each BR, mainly due to the aspects related to soluble aluminates, silicates, and sodium, which in association with the soluble ions from PC, affected the chemical reaction and agglomeration/flocculation forces of particles.