8 April 2023 in Meteoritics & Planetary Science
NASA's OSIRIS‐REx spacecraft collected samples from carbonaceous near‐Earth asteroid (101955) Bennu on October 20, 2020, and will deliver them to the Earth on September 24, 2023. The samples will be processed at the NASA Johnson Space Center (JSC), where most of the sample collection will be subsequently curated in a new cleanroom suite. The spacecraft collected loose regolith two ways: in a bulk sample chamber capable of holding up to 2 kg, and on industrial Velcro “contact pads” intended to collect small particles at the surface. Included in the JSC collection will be the bulk sample, the contact pads, contamination‐monitoring witness plates, and supporting hardware. Planning for the curation of the samples and hardware started at the earliest phase of proposal development and continued in parallel with project development and execution. Because a major mission goal is characterization of organic compounds in the Bennu samples, extra effort was spent in the design stage to ensure a clean curation environment. Here, we describe the preparations to receive the sample, including the design, construction, outfitting, and monitoring of the cleanrooms at JSC; the planned recovery of the sample‐containing capsule when it lands on Earth; and the approach to characterizing and cataloging the samples. These curation efforts will result in the distribution of pristine Bennu samples from JSC to the OSIRIS‐REx science team, international partners, and the global scientific community for years to come.
19 October 2017 in IEEE Transactions on Plasma Science
Results from a smoothed-particle hydrodynamics (SPH) method of modeling electrode ablation in pulsed power systems are presented. The model follows numerous previous studies on electrode erosion in which the primary mechanism is conductive heat transfer. Total eroded mass as a function of peak current, frequency, and circuit damping were compared to theoretical and experimental data. The results indicate an average of a 16% deviation of the SPH code from the analytical prediction; however, most of the SPH data points qualitatively fall close to or within experimental ranges. The results indicate the potential of the SPH code to effectively model fusion propulsion reactor components for use in space travel.
21 August 2018 in IEEE Transactions on Plasma Science
The University of Alabama in Huntsville (UAH) in partnership with the National Aeronautics and Space Administration at Marshall Space Flight Center is working to develop a pulsed power facility. The facility, known as Charger-1, is a 1-TW pulsed power machine. The hardware was originally DECADE Module 1 from L-3 Pulsed Sciences Division in San Leandro, CA. The DECADE program enabled the construction of several pulsed-power modules. Together, they were used for high-energy X-ray generation and weapons effects testing. The module at UAH is being outfitted for z-pinch propulsion system and nuclear energy production experiments. Its primary envisioned goal is to support the development of a Pulsed Fission-Fusion propulsion system with experimental data. This document is intended to update the nuclear and pulsed power communities as to the progress of the facility development. An overview of the facility and its status is presented.