14 December 2023 in Energy & Environmental Science
Rechargeable magnesium batteries (RMBs) are emerging as promising alternatives to lithium-ion batteries due to their high volumetric capacity and natural abundance. However, challenges arising from severe passivation and uneven deposition in conventional electrolytes persist, resulting in poor reversibility and cycling stability. Herein, a covalent molecule of 1-chloropropane (CP) is introduced into conventional electrolytes to manipulate the kinetics and surface chemistry of Mg anodes. Stemming from the reduced surface energy of the Mg (002) crystal plane from CP–Mg interactions, a horizontally arranged platelet morphology with enhanced (002) orientations is preferentially formed during the electrodeposition process. Moreover, the appropriate lowest unoccupied molecular orbital energy level of CP enables a robust Cl-rich interphase in situ formed on the Mg electrode surface. The planar deposition morphology coupled with the protective interphase can effectively suppress parasitic reactions between Mg electrodes and electrolytes and facilitate the electrochemical reaction kinetics. The as-designed electrolyte achieves reversible Mg plating/stripping with a high coulombic efficiency of 99.79% in asymmetric cells and maintains stable cycling for over 215 h in symmetric cells at an ultrahigh current density of 25 mA cm−2, outperforming previously reported results. This engineered electrolyte also exhibits excellent compatibility with different inorganic/organic cathode materials, offering promising opportunities for RMB applications.
3 March 2025 in Advanced Materials
Organic mixed ionic‐electronic conductors have emerged as a key material for the development of bioelectronic devices due to their soft mechanical properties, biocompatibility, and high volumetric capacitance. In particular, PEDOT:PSS has become a choice material because it is highly conductive, easily processible, and commercially available. However, PEDOT:PSS is dispersible in water, leading to delamination of films when exposed to biological environments. For this reason, chemical cross–linking agents such as (3‐glycidyloxypropyl)trimethoxysilane (GOPS) are used to stabilize PEDOT:PSS films in water, but at the cost of decreased electrical performance. Here, it is shown that PEDOT:PSS thin films become water‐stable by simply baking at high temperatures (>150 °C) for a short time (≈ 2 min). It is shown that heat‐treated PEDOT:PSS films are as stable as their chemically‐cross–linked counterparts, with their performance maintained for >20 days both in vitro and in vivo. The heat‐treated films eliminate electrically insulating cross–linkers, resulting in a 3× increase in volumetric capacitance. Applying thermal energy using a focused femtosecond laser enables direct patterning of 3D PEDOT:PSS microstructures. The thermal treatment method is compatible with a wide range of substrates and is readily substituted into existing workflows for manufacturing devices, enabling its rapid adoption in the field of bioelectronics.
21 August 2023 in Materials Horizons
Green hydrogen produced via electrochemical water splitting is a suitable candidate to replace emission-intensive fuels. However, the successful widespread adoption of green hydrogen is contingent on the development of low-cost, earth-abundant catalysts. Herein, machine learning models built on experimental data were used to optimize the precursor ratios of hydroxide-based electrocatalysts, with the objective of improving the product's electrocatalytic performance for overall water splitting. The Neural Network-based models were found to be the most effective in predicting and minimizing the overpotentials of the catalysts, reaching a minimum in two iterations. The relatively mild reaction conditions of the synthesis procedure, coupled with its scalability demonstrated herein, renders the optimized catalyst relevant for industrial implementation in the future. The optimized catalyst, characterized to be a molybdate-intercalated CoFe LDH, demonstrated overpotentials of 266 and 272 mV at 10 mA cm−2 for oxygen and hydrogen evolution reactions respectively in alkaline electrolyte, alongside unwavering stability for overall water splitting over 50 h. Overall, our results reflect the efficacy and advantages of machine learning strategies to alleviate the time and labour-intensive nature of experimental optimizations, which can greatly accelerate electrocatalysts research.
18 May 2022 in Battery Energy
Room‐temperature sodium–sulfur batteries (NaSBs) are promising candidates for next‐generation large‐scale energy storage solutions. However, the well‐known polysulfide shuttling of soluble long‐chain sulfur intermediates still remains a limitation in NaSBs, leading to rapid capacity loss arising from the dissolution of active sulfur into the electrolyte. This problem is effectively circumvented in quasi‐solid‐state conversion cathodes by elimination of the presence of these soluble intermediates altogether, with only insoluble intermediates formed in the process. Herein, we discuss various cathode materials that undergo quasi‐solid‐state conversion when cycled in a liquid electrolyte, including chemically bonded short‐chain sulfur species, short‐chain sulfur via physical confinement, and quasi‐solid‐state conversion cathodes with long‐chain sulfur moieties. We conclude by highlighting the current challenges and possible strategies to improve the mechanistic understanding and cycling performance of NaSBs for practical applications.
23 November 2023 in Advanced Materials
26 December 2023 in RSC Sustainability
Applying electro-organic synthesis in flow configuration can potentially reduce the pharmaceutical industry's carbon footprint and simplify the reaction scale-up.