Masahiko Hatakeyama

Masahiko Hatakeyama

Auto-generated profile, based on publicly available information

Masahiko Hatakeyama

Graduate School of Material Science and Engineering for Research, University of Toyama

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2022 in MATERIALS TRANSACTIONS
Verified
Journal Article
Closed access
PDF file
KSKaede Sarayama
Kaede Sarayama
KNKenichi Nakano
Kenichi Nakano
YSYusuke Shimada
Yusuke Shimada
AMAmi Morihiro
Ami Morihiro
MHMasahiko Hatakeyama
Masahiko Hatakeyama
KSKoichi Sato
Koichi Sato
Polarization tests of the β-phase (Mg17Al12) in Mg–Al alloys were conducted using a 0.1 M NaCl solution (pH 11); Ecorr of the β-phase was −1.377 V. When Ag or Zn was added to the β-phase, Ecorr increased depending on the standard potential of the additive elements. However, the additive elements showed no significant difference in passive behavior during the test. This suggested that the additive elements did not affect the dissolution of the protective surface film. The same polarization test was conducted on pure Mg, and the results were compared with those of the β-phase. The anodic regions of the two polarization curves had different profiles. It was confirmed that the protective surface films formed on the pure Mg and β-phase had different properties.

1 May 2022 in MATERIALS TRANSACTIONS
Verified
Journal Article
Closed access
PDF file
MKMochisuke Kume
Mochisuke Kume
DIDaisuke Iwashima
Daisuke Iwashima
MHMasahiko Hatakeyama
Masahiko Hatakeyama
SSSatoshi Sunada
Satoshi Sunada
Fe–Cu–C sintered steel is prone to rust, therefore rust preventive oil is used for storage. These rust preventive oils generally have a problem of reduced workability due to stickiness caused by high viscosity. However, few electrochemical studies have been conducted on the correlation between viscosity and corrosion resistance. Therefore, in this study, we investigated the effect of the base oil viscosity on the corrosion resistance of rust preventive oil by changing the base oil viscosity.As an experimental method, electrochemical measurements were carried out using the water screen test established in our laboratory, which can quantitatively evaluate the rust preventing ability. According to the polarization curves measurements, corrosion current density Icorr is reduced by coating the rust preventive oil. It showed about 100,000 times better corrosion resistance with and without rust preventive oil. While, almost no difference in rust preventive ability was confirmed due to the difference in base oil viscosity. According to the results of the open circuit potential, the time required for the potential of Fe–Cu–C sintered steel to saturate was 505 ks for low viscosity, 651 ks for medium viscosity, and 340 ks for high viscosity. Therefore, it was found that there is no correlation between the time until rust occurs and the viscosity of the oil film. It was also found that the effects of the additives were fully exerted even if the oil viscosities were different. Therefore, the problem of reduced workability due to stickiness can be solved by using low viscosity base oil.

10 June 2022 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
MHMasahiko Hatakeyama
Masahiko Hatakeyama
YSYusuke Shimada
Yusuke Shimada
NKNaoki Kawate
Naoki Kawate
KSKaede Sarayama
Kaede Sarayama
SSSatoshi Sunada
Satoshi Sunada
The β phase (Al 12Mg 17) precipitated by heat treatment in some alloy compositions may result deterioration of corrosion resistance. However, much of its role remains unclear. The effect of the β phase on the corrosion resistance behavior in a NaCl solution was presented in this study. The specimen was Mg-9mass%Al (AM90) alloy and the content of the β phase precipitant was controlled systematically by aging time at 473 K. Area rate of β and lamellar phase in the specimens were 0, 10 and 100%, respectively. According to the results of cathodic polarization curves measurement, the corrosion current density of α phase was 0.215 A/m2 and β phase of it was 0.096 A/m2. While, the specimen includes 10% of β and lamellar phase showed large corrosion current density of 0.251 A/m2. Positive correlation between the β phase and the open circuit potential, suggest that the β phase acts as a cathodic electrode. Moreover, the microstructure after postentiostatic corrosion tests was also support the role of β phase.

1 June 2022 in MATERIALS TRANSACTIONS
Verified
Journal Article
Closed access
PDF file
MHMasahiko Hatakeyama
Masahiko Hatakeyama
KNKoichiro Nagae
Koichiro Nagae
MNMasaki Naganawa
Masaki Naganawa
IYIchiro Yoshino
Ichiro Yoshino
SSSatoshi Sunada
Satoshi Sunada
In recent years, stainless steel has been used as a separator in polymer electrolyte fuel cells (PEFCs). An electrophoretic deposition (EPD) method has been developed as a surface treatment, in which titanium nitride (TiN) is coated on stainless steel to impart conductivity. Using the EPD method, the surface of SUS316L steel was coated with three types of TiN–styrene-butadiene rubber (SBR) with different TiN particle diameters and impurity contents to improve the contact resistance. A smaller impurity content in the TiN resulted in a lower contact resistance. Furthermore, when the TiN particle size was between 50 nm and 1.5 µm, a larger particle size provided a lower contact resistance. In the polarization curve measurements, no deterioration of the corrosion resistance was observed for TiN–SBR. At the potential of an actual PEFC environment, low current densities were maintained in both the anodic and cathodic environments. Furthermore, scanning electron microscopy and electron probe microanalysis before and after the polarization test confirmed that there was no TiN detachment in the PEFC environment. The above results suggest that TiN-coated SUS316L steel is a promising separator for PEFCs.

1 September 2022 in MATERIALS TRANSACTIONS
Verified
Journal Article
Closed access
PDF file
MHMasahiko Hatakeyama
Masahiko Hatakeyama
KNKenichi Nakano
Kenichi Nakano
RYRyosuke Yoshita
Ryosuke Yoshita
DNDaichi Nakato
Daichi Nakato
SSSatoshi Sunada
Satoshi Sunada
MNMasateru Nose
Masateru Nose
Magnesium alloys have low corrosion resistance due to their high chemical activity. Therefore, it is necessary to improve their corrosion resistance to use in corrosive environments. In the present study, we aimed to improve the corrosion resistance of AZ91 magnesium alloy in NaCl solution, using aluminum sputtering deposition, anodic oxidation treatment and sealing process were examined. To evaluate the corrosion rate, electrochemical experiments were carried out. In the case of just aluminum sputtering deposition, corrosion resistance was not improved due to small defects in the sputtering deposition. However, corrosion resistance was improved by sputtering deposition followed by interdiffusion treatment at 553 K for more than 3 hours. Corrosion resistance was further improved by anodic oxidation treatment and sealing process after the interdiffusion treatment. With this series of treatments, the corrosion rate of the samples was reduced to 1/360 compared to that of AZ91 base metal. The results show that the interdiffusion treatment, anodic oxidation treatment and sealing process after sputtering deposition are significantly effective to improve corrosion resistance of AZ91 magnesium alloy.

18 February 2022 in Nuclear Materials and Energy
Verified
Journal Article
Open access
MHM. Hatakeyama
M. Hatakeyama
TYT. Yamamoto
T. Yamamoto
KYK. Yasuda
K. Yasuda
SMS. Matsumura
S. Matsumura
KYK. Yasunaga
K. Yasunaga
KSK. Sato
K. Sato