The use of microstrip transmitarrays (TAs) and reflectarrays (RAs) is essential in long-range communication systems because of their high-gain radiations, narrow beam widths, simple configurations, and easy fabrication. We propose a novel antenna system that combines the functionalities of TAs and RAs. The antenna system consists of a specially designed bifunctional metalens and a self-made Vivaldi antenna (feed source). The metalens can focus the y-polarized incident wave at the transmission side and focus the x-polarized wave at the reflection side with the same focal length. By launching the metalens with differently polarized Vivaldi antennas, we were able to obtain a TA and RA. Moreover, the realized RA can deflect the radiation beam to a specified angle to avoid blockage of the feed antenna. Our numerical and experimental results coincided, indicating that the proposed antenna system demonstrated several improvements, including the ability to achieve multiradiation patterns, realize high gains, and adopt simple standard print circuit board technology. Our findings significantly expand the capabilities of metasurfaces in controlling electromagnetic waves and open up a new avenue for the design of high-performance multifunctional antenna systems and metadevices.
Multifunctional metasurface integrating different functions can significantly save the occupied space, although most of bifunctional metasurfaces reported to date only control the wave in either reflection or transmission regime. In this paper, we propose a scheme that allows one to independently control the reflection and transmission wavefront under orthogonal polarizations. For demonstration, we design a bifunctional metasurface that simultaneously realizes a diffusion reflection and a focusing transmission. The diffusion reflection is realized using a random phase distribution, which was implemented by randomly arranging two basic coding unit cells with the aid of an ergodic algorithm. Meanwhile, the hyperbolic phase distribution was designed to realize the focusing functionality in the transmission regime. To further show the potential applications, a high-gain lens antenna was designed by assembling the proposed metasurface with a proper feed. Both simulation and measurement results have been carried out, and the agreement between the two results demonstrates the validity of the performance as expected. The backward scattering can be reduced more than 5 dB within 6.4-10 GHz compared with the metallic plate. Moreover, the lens antenna has a gain of 20 dB (with around 13 dB enhancement in comparison with the bare feeding antenna) and an efficiency of 32.5%.
In this paper, we proposed for the first time a novel mechanism to design a tri-band low-scattering metasurface. The radar cross section (RCS) reduction in the three operational bands relies on scattering diffusion, absorption, and scattering cancellation, respectively. The diffusion metasurface was realized by distributing scattering unit cells with different rotation angles. For the absorption, four units operating at different frequencies were combined to achieve a broadband absorption. The scattering cancellation was realized by arranging two out of phase elements in a chessboard configuration. The tri-band metasurface was constructed by directly combining the three metasurfaces in a single assembly. The simulated and measured results have a good agreement. The tri-band RCS reduction is well preserved up to 45° with polarization-independent performance. This paper provides an alternative approach to design the multi-band metasurface for stealth application.
12 June 2018 in IEEE Antennas and Wireless Propagation Letters
In this paper, we present a single-layered circularly polarized reflectarray antenna with a broad operating bandwidth that in terms of realized gain, axial ratio (AR), radiation pattern and aperture efficiency (AE). By employing multiple plasmon resonances, the proposed quasi-I-shaped element achieves broadband linearly polarized conversion effect, which will contribute to a broadband reflectarray design. Thus based on the element angular rotation method, a broadband offset-fed reflectarray with size of 215-215mm2 and cells of 43$\times$43 is designed, simulated, and then fabricated and measured. Good performances can be observed from both simulated and measured results, which confirm that the reflectarray antenna achieves a 75% 3-dB AR bandwidth (10 to 22 GHz) and a 49.7% 3-dB gain bandwidth (12.4-20.6 GHz). Furthermore, the measured AE exceeds 50% within a 28.2% bandwidth.
In this paper, a conformal optical transparent metamaterial absorber (COTMA) is proposed based on the circuit analog optimization method (CAOM), which can effectively enhance the optimization speed in the metamaterial absorber structure design by quantifying the equivalent circuit parameters. The operating frequency band can be customized at any band through CAOM, such as microwave, terahertz, and near-infrared frequencies. Here, a five-square-patch structure absorber with transparency and flexible properties is achieved. The simulated and measured incident electromagnetic (EM) wave absorptions of COTMA can reach above 90% in 15.77 - 38.69 GHz band. Meanwhile, COTMA exhibits excellent conformal EM absorption, a thinner substrate (0.078 wavelength at 15.77 GHz), lower structure complexity and polarization independence, and it can also be adapted to the EM absorption of different curved screens. This design is expected to have potential applications for wearable electronics, curved surface screens and OLED displays.
Metasurface provides an unprecedented means to manipulate electromagnetic waves within a two-dimensional planar structure. Traditionally, the design of meta-atom follows the pattern-to-phase paradigm, which requires a time-consuming brute-forcing process. In this work, we present a fast inverse meta-atom design method for the phase-to-pattern mapping by combining the deep neural network (DNN) and genetic algorithm (GA). The trained classification DNN with an accuracy of 92% controls the population generated by the GA within an arbitrary preset small phase range, which could greatly enhance the optimization efficiency with less iterations and a higher accuracy. As proof-of-concept demonstrations, two reflective functional metasurfaces including an orbital angular momentum generator and a metalens have been numerically investigated. The simulated results agree very well with the design goals. In addition, the metalens is also experimentally validated. The proposed method could pave a new avenue for the fast design of the meta-atoms and functional meta-devices.