We present embroidered antennas and interconnections in passive UHF RFID textile tags and test their strain reliability. Firstly, we fabricate tag antennas on two different stretchable fabric substrates by five different embroidery patterns and choose the most stretchable ones for testing. Next, the tag ICs are attached by sewing and gluing, and the tag reliability during repeated stretching cycles is evaluated through wireless measurements. Initially, the chosen tags achieve read ranges of 6–8 meters and can strain up to 140–150% of their original length. After 100 stretching cycles to 80% of their maximum strain, the read ranges of the tags with glued interconnections are similar to the initial values. In addition, also the read ranges of the tags with sewed interconnections are still more than 70%–85% of their initial values. However, some challenges with the reproducibility need to be solved next.
Passive radio frequency identification-based technology is a convincing approach to the achievement of versatile energy- and cost-efficient wireless platforms for future wearable applications. By using two-part antenna structures, the antenna-electronics interconnections can remain non-stressed, which can significantly improve the reliability of the textile-embedded wireless components. In this article, we describe fabrication of two-part stretchable and non-stretchable passive ultra-high frequency radio frequency identification textile tags using electro-textile and embroidered antennas, and test their reliability when immersed as well as under cyclic strain. The results are compared to tags with traditional one-part dipole antennas fabricated from electro-textiles and by embroidery. Based on the results achieved, the initial read ranges of the two-part antenna tags, around 5 m, were only slightly shorter than those of the one-part antenna tags. In addition, the tag with two-part antennas can maintain high performance in a moist environment and during continuous stretching, unlike the one-part antenna tag where the antenna-integrated circuit attachment is under stress.
A novel compact active BeiDou helical antenna, operating at normal mode is proposed for high-shock projectile applications. To achieve excellent impedance matching, a grounded matching stub is introduced in this design. For demonstration, a prototype with extremely compact size (22×22 mm) is fabricated and measured. The measured reflection coefficients below 10-dB is almost 15 MHz centered at 1268 MHz. Omni-directional radiation pattern of the proposed antenna is realized. Additionally, stable signal reception under various motion attitudes could also be proved by experiments.
In the article titled “Experimental Study on Strain Reliability of Embroidered Passive UHF RFID Textile Tag Antennas and Interconnections” [1], the Acknowledgments section should be corrected as follows: