The ionicliquid [MMIM][DMP] was synthesized from the reactants methyl imidazole [MIM] and trimethylphosphate [TMP] and verified using 1HNMR and FTIR. Coconut coir dust was pretreated with a 1% alkaline solution.Its crystalline structure increased significantly due to the dissolution of lignin and hemicelluloses under alkaline conditions, exposing the cellulose. After NaOH and IL were employed, the XRD showed that peak (002) decreased significantly and peak (101) almost vanished. This significant decrease in crystallinity was related to the alteration of the substrate from the cellulose I structure to the cellulose II structure. The pretreated substrates were hydrolyzed to convert them to reducing sugars by pure cellulase and xylanase,and the reaction was conducted at 60°C, pH 3, for 12 or 48 hours. The yields of sugar hydrolyzed from untreated and NaOH-pretreated substrates were 0.07 and 0.12 g sugar/g lignocellulose, respectively. Pretreatment with IL or the combination of NaOH+IL resulted in yields of reducing sugars of 0.11 and 0.13 g/g, respectively. These findings showed that IL pretreatment of the high-lignin lignocellulose is a new prospect for the economical manufacture of reducing sugars and bioethanol in the coming years.
28 February 2023 in Eastern-European Journal of Enterprise Technologies
Many countries worldwide encounter the greatest difficulties in improving people's life quality since fossil fuel reserves are decreasing, causing fuel prices to rise drastically. This problem has made many countries, including Indonesia, struggle to import them from producers in the Middle East. Adding a small part of ethanol to gasoline is one of the solutions that has been investigated and developed. The previous works relating to blended fuels, gasoline and ethanol, generally employed absolute alcohol, which was expensive. A small surfactant was added to the mixture to stabilize the emulsion, and the blending was conducted in normal conditions (room temperature). If the composition of gasoline and aqueous ethanol is not precise, the components can be separated at a specific temperature. The present study is aimed to report the analysis of compositions and fuel specifications of aqueous emulsions of gasoline (RON 90)-ethanol-water in a single phase without using a synthetic surfactant in the temperature range of 0–25 °C. The procedures were as follows: fermentation, ethanol distillation and purification, cooling, blending, and characterization of fuel specifications. Components of gasoline (RON 90)-ethanol-water formed a stable emulsion in the composition range of 28.00‒99.79 %, 0.20‒67.97 %, and 0.01‒3.58 %. The observation found that continually increasing the amount of aqueous ethanol and temperature after one phase was attained would not lead to the separation of components. Therefore, gasoline and aqueous ethanol can form a single phase functioning as a surfactant binding water and fossil fuel. The decrease in temperature after the emulsion is stabilized can separate the components whereby it is caused by the faster density change of aqueous ethanol than gasoline
31 August 2023 in Eastern-European Journal of Enterprise Technologies
This study investigates the fuel properties of ethanol-butanol-gasoline emulsions prepared with varying ethanol concentrations (80, 90, and 96%) to develop stable and efficient alternative fuels. Key parameters evaluated include the research octane number (RON), Reid vapor pressure (RVP), fuel density, specific gravity (SG), distillation characteristics, and copper strip corrosion resistance, with an emphasis on stability and performance at temperatures between 15 and 30 °C. The results indicate that these fuel blends exhibit high octane ratings, with RON values ranging from 91.8 to 94.1, demonstrating strong anti-knock characteristics suitable for high-performance engines. The RVP increases from 41 to 50 kPa as ethanol content rises, supporting stability under diverse environmental conditions. Fuel density decreases from 0.798 to 0.759 g cm-3, while SG ranges from 0.770 to 0.715, reflecting the influence of ethanol content on fuel mass and volume. Copper strip corrosion tests conducted in accordance with American Society for Testing and Materials, ASTM D130 standards confirmed that all blends are non-corrosive, achieving a “Class 1” corrosion rating and ensuring compatibility with engines containing copper or other metallic components. Distillation tests revealed initial boiling points (IBP) between 41 and 45 °C and final boiling points (FBP) from 122 to 177 °C. Overall, these findings suggest that ethanol-butanol-gasoline emulsions offer notable benefits for enhancing engine performance, reducing emissions, and improving fuel stability.