1 February 2017 in Biomedical Signal Processing and Control
RCRodrigo Castañeda-Miranda
Rodrigo Castañeda-Miranda
+1
A large part of the biomedical research spectrum is dedicated to develop electrocardiogram (ECG) signal processing techniques to contribute to early diagnosis. However, it is common to find that ECG analysis methods reported are confined to off-line PC host operation. The authors present an arrhythmia classification method implemented on a Digital Signal Processing (DSP) platform intended for on-line, real-time ambulatory operation to classify eight heartbeat conditions: normal sinus rhythm (N), auricular fibrillation (AF), premature atrial contraction (PAC), left bundle branch block (LBBB), right bundle branch block (RBBB), premature ventricular contraction (PVC), sinoauricular heart block (SHB) and supraventricular tachycardia (SVT). The algorithm uses a wavelet transform process based on quadratic wavelets for identifying individual ECG waves and obtain a fiducial marker array. Classification is conducted by means of a Probabilistic Neural Network. The algorithm is tested with 17 ECG records obtained from the PhysioNet repository. The proposed classification procedure was tested initially on MATLAB and the results where compared with the equivalent analogue data fed to a DSP-based ECG data acquisition prototype through an arbitrary waveform generator. The results derived from confusion matrix tests yielded on-line classification accuracy of 92.69% (AF), 97.15% (N), 76.82% (PAC), 91.06% (LBBB), 87.5% (RBBB), 71.04% (PVC), 91.94% (SHB) and 95.45% (SVT), overall classification rate of 92.746% and 100% agreement between the MATLAB and on-line DSP implementations. The results suggest that the method and prototype presented may be suitable for being implemented on wearable sensing applications auxiliary for on-line, real-time diagnosis
2 October 2019 in IEEE Transactions on Industrial Electronics
Power quality in electrical systems is a basic requirement that should be guaranteed. Nonetheless, the increase of power-electronics-based applications and nonlinear loads have induced harmonic distortion leading to a degradation of the power quality; therefore, effective methods to measure and suppress such distortion need to be developed. The main contributions of this paper are: the development of a novel fast-converging optimal estimator to determine on-line the harmonic components of a time-varying signal, which can be used for analysis and control purposes; the usage of the estimator to generate reference signals for an optimal control system in order to suppress the harmonics components; and the experimental validation of the proposed methodology as a feasible solution for industrial applications. The proposal considers practical assumptions such as the signal to be analyzed is corrupted with noise and contains time-varying harmonics (no a steady-state condition is assumed). As an application of the harmonic estimator, two experimental tests are carried out: firstly, the optimal determination of the harmonic components of the current waveform in a nonlinear load, and secondly, the usage of harmonics information to mitigate them through of an active power filter, which is controlled by using an optimal trajectory tracking control scheme.
10 July 2019 in IEEE Transactions on Circuits and Systems I: Regular Papers
The modeling and control problem for a grid-connected photovoltaic (PV) power electronic system, which includes a dc/dc boost converter, an inverter and a filter are considered. A linear complementarity (LC) dynamic model of the PV system allows the design of a model predictive controller (MPC). Dynamic models of the subsystems are obtained and merged in order to represent the whole PV system in a compact and comprehensive LC model, which is valid for all operating modes of power converters and PV cells involved in the energy conversion process. A finite-control-set MPC problem is formulated as a mixed-integer quadratic program subject to the dynamic LC model and pulse width modulators. The minimization of an objective function aimed at tracking dc voltage and grid current references provides directly the commands for the switches of the boost converter and inverter. Numerical results show the effectiveness of the proposed strategy for maximum power point tracking and synchronization to the grid under dynamic scenarios characterized by variations of the solar irradiance.
1 July 2023 in Ingeniería Investigación y Tecnología
El presente trabajo describe un estudio experimental realizado en empresas empacadoras de zarzamoras con la finalidad de valorar la eficiencia de los sistemas de medición por atributos utilizados. Una característica de este tipo de sistemas de medición es la naturaleza cualitativa y la valoración subjetiva que los inspectores de calidad emplean para valorar los frutos. En el trabajo, se presentan los resultados de análisis de los sistemas de medición por atributos utilizados en dos empresas dedicadas a la actividad de empaque de frutos, las cuales obtuvieron resultados contrastantes en los análisis de concordancia, que son comparados mediante el valor obtenido en el coeficiente estadístico Kappa de Fleiss. Las diferencias obtenidas en los dos casos de estudio son analizadas por medio de datos adicionales que describen características de cada sistema de medición por atributos empleado y que se sugieren como un factor relevante para los resultados obtenidos en cada empresa. El trabajo culmina discutiendo sobre las posibles acciones de mejora para el diseño e implementación de un sistema de medición por atributos en empresas de empaque de zarzamoras.