11 April 2023 in Journal of Lightwave Technology
We proposed and experimentally demonstrated a high-resolution omnidirectional vector bending sensor based on 7-core fiber Mach-Zehnder interferometers (MZIs), which is interrogated by the microwave photonics technique. The sensor is composed of three MZIs in the 7-core fiber, and each MZI consists of two symmetric outer cores. Instead of using the traditional wavelength demodulation method, which has the drawback of very limited resolution due to the used optical spectrum analysis devices, e.g., optical spectrum analyzer (OSA), the proposed sensor is interrogated by high-resolution microwave photonics filter (MPF) system, which is capable of offering up to KHz level measurement resolution. As a result, curvature measurement with resolution of 0.0213 m -1 is demonstrated when the used resolution of vector network analyzer (VNA) is 500 kHz. Thanks to the ultra-high measurement resolution of VNA (∼KHz), the curvature resolution can achieve 4.27 х 10 -5 m -1 in theory, which is 2 orders of magnitude higher than the traditional wavelength demodulation-based fiber bending sensors. The measured curvature sensitivity of the MZI exhibits highly bending direction dependence, attributed to different strain variation under distinct bending angle. In addition, owing to the different angular positions of cores of the MZI in the 7-core fiber, the MZIs have differential response to fiber bending. This feature has been used to develop vector bending sensing, which is manage to determine the bending direction by using any two MZIs, and the obtained average relative errors for the retrieved curvature and bending direction are 2.57% and 0.86%, respectively. The proposed sensor possesses the unique advantages of high sensitivity and high resolution over the state-of-the-art technology, which is very promising for omnidirectional vector bending sensing in the future.
9 May 2024 in Journal of Lightwave Technology
In this paper, a novel heterogeneous 8-core fiber, with a standard cladding diameter of 125 μm, is proposed for C-band transmission. The structural parameters of 8-core fiber have been meticulously optimized through the utilization of an artificial intelligence-based algorithm, which resulted in a notable decrease in crosstalk and confinement loss, as the effective mode area of each core is sufficiently large to partially suppress the accumulation of nonlinear effects. The designed 8-core fiber was manufactured by traditional plasma chemical vapor deposition process. Besides, in order to implement the optical interconnection between single-mode fiber and 8-core fiber, a pair of corresponding fan-in/fan-out devices with low insertion loss have also been developed. The maximum crosstalk of designed 8-core fiber was measured to be -52.9 dB/10 km at 1550 nm. Finally, using these fan-in/fan-out devices, we successfully demonstrated a 1.6Tbps (4x400G) self-homodyne coherent detection transmission in C-band over 10 km, and the transmission characteristics were evaluated using a PDM-16QAM transceiver.
10 October 2023 in Journal of Lightwave Technology
We propose and experimentally verify a self-homodyne coherent (SHC) transmission scheme based on a 1+8 multicore fiber with one polarization-maintaining central core and eight ordinary single-mode cores. The 1+8 multi-core fiber can take advantage of SHC by reducing the path mismatch introduced by the fiber, and does not require an additional polarization control unit. Since it provides 8 spatial channels under the 150μm fiber cladding diameter, the optical capacity density per unit area has been improved. The fabrication process of the 1+8 multi-core fiber and the fan-in/fan-out device corresponding to the fiber are described. Finally, we successfully demonstrate real-time 6.4 Tbps (8×800G) SHC transmission by using this multicore fiber. The system allows the use of a high-powered distributed feedback (DFB) laser and reduces the complexity of digital signal processing (DSP). This study shows that using multicore fiber is an attractive solution for future co-packaged optical-IO switching applications.
23 October 2024 in IEEE Photonics Journal
We propose and fabricate an unconventional photonic lantern that is not only able to achieve mode multiplexing and demultiplexing, but also has the functionality of mode-dependent loss equalization. In the process of fusion splicing between the tail fiber of photonic lantern and the few-mode fiber, by controlling the fusion splicing parameters, a refractive index (RI) modified waveguide is formed at the fusion splicing region, through which the fundamental mode will have higher attenuation than the higher-order modes, which enables us to control the attenuation of different modes, so that we can customize the unconventional photonic lantern with different differential mode attenuation (DMA). Simulation has been carried out to investigate the dependence of DMA on the structure of the RI modified waveguide, and experiments have been implemented to investigate the dependence of DMA on discharge parameters, which matches well with the simulated tendency. In addition, CCD measurements of all three output ports have been performed on the fabricated devices, well-defined mode field patterns and high mode purity at the C-band can be observed. The proposed novel unconventional photonic lanterns open a new way to obtain simultaneous mode multiplexing / demultiplexing and mode-dependent loss equalization function, which will be greatly beneficial in the few-mode fiber transmission system.
11 March 2025 in Journal of Lightwave Technology
With the development of AI, the capacity demand for interconnection between computing component is increasing. As a solution has been vigorously developed in the past half of century, optical interconnection has been put forward with higher demands. Few-mode multi-core fiber (FM-MCF), a key technology within spatial division multiplexing (SDM), has consistently pushed the boundaries of single optical fiber communication capacity records. However, the non-standardized fiber design of FM-MCF poses a significant challenge in terms of multiplexing and demultiplexing. The difficulty lies in the preservation of high-order modes and mode field adaptation. To address these challenges, we propose a universal fiber-core multiplexing/demultiplexing solution for FM-MCF, leveraging multi-mode optical fiber (MMF) as a versatile bridging medium. The simulation and experimental results demonstrate excellent insertion loss and high-order mode retention capabilities. This solution offers compatibility with a wide range of FM-MCF designs, making it highly adaptable for various research applications. Furthermore, by using commercially available MMF, the solution reduces both cost and complexity, presenting a practical and scalable approach to advancing FM-MCF technology as a next-generation transmission medium for AI-driven computing systems.