1 February 2023 in Practice Periodical on Structural Design and Construction
A cellular beam is a widened I-profile section with circular web openings. This type of perforated-web beam has been used immensely throughout the world during the last two decades. Lateral torsional buckling is one of the steel beam’s limit state designs. This study aims to investigate the behavior of cellular beams against lateral torsional buckling. A validated numerical model was employed in a sort of parametric study. The examined parameters are applied load configurations and the geometrical ratios of flange width-to-thickness, web height-to-thickness, openings’ spacing-to-diameter, beam’s span-to-depth, and opening’s diameter to beam-depth. Based on the results of the parametric study, a lower-bound design formula for predicting the lateral torsional buckling moment resistance of simply supported cellular beams was proposed. The suggested design formula can predict, with an acceptable degree of accuracy, the lateral torsional bending strength of simply supported cellular beams being subjected to various types of destabilizing loads.
23 February 2024 in Mechanics
In this study, we present a new identification method of parameters characterizing the elastoplastic damage behavior of sheet metal based on analysis of variance. The analysis covered experimental and numerical simulation results using the finite element method of the sheet mild steel bulge test. The identification procedure was validated through a confrontation between numerical simulations and experimental results on several hydroforming applications, such as a free expansion and an expansion in matrix cavities. Results show consistency between experimental observations and numerical predictions of instabilities. Furthermore, the location of risk areas of instability and rupture and the damage level could be quantified. The analysis focused on a set of results combining experimental data and numerical simulations of the bulge test of steel sheets. The identified models were validated thanks to a comparison between numerical simulations and experimental results of a set of forming applications by bulge test. The results show coherence between the experimental observations and the numerical predictions of the instabilities.
2 August 2024 in Engineering, Technology & Applied Science Research
This study presents a comprehensive Finite Element (FE) model of the multiple-cable-to-pylon head joint within a specific cable roof structure. The analysis focuses on the upper part of the pylon substructure, particularly the pylon head joint, to examine its localized behavior under a set of internal forces derived from a simplified FE model. The steel tubular components of the pylon substructure were precisely simulated using thin shell elements. The designers of this particular roof structure proposed two solutions for reinforcing the pylon-head joint, while an additional novel strengthening technique was introduced, aimed at enhancing the joint's performance. These three strengthening methods, along with the original design joint, were modeled numerically, and the joint's effectiveness was assessed. The findings of the analysis indicate that the newly proposed strengthening technique exhibits greater potential for stiffening the considered pylon-head joint compared to the other introduced solutions. The study concludes with significant insights relevant to practical applications.