14 February 2019 in Materials for Renewable and Sustainable Energy
The influence of the surface modification of multi-walled carbon nanotubes (MWCNT) with nitrogen-containing compounds on the performance of 40 wt% Pt/MWCNT catalysts in the oxygen electroreduction reaction (ORR) was investigated using a rotating disk electrode (RDE) at 10–35 °C in 0.1 M HClO4 as electrolyte in electrochemical cell, and in a hydrogen–oxygen polymer electrolyte membrane fuel cell (PEMFC) at 82 °C. The catalysts were characterized by low-temperature nitrogen adsorption, XPS, TEM, gas-phase CO titration, electrooxidation of the adsorbed CO monolayer, and cyclic voltammetry. It was shown that the modification of MWCNT with melamine–formaldehyde resin leads to the surface nitrogen concentration up to 8.3 at.% (CNT-MF sample). The 40 wt% Pt/CNT-MF catalyst with 0.1 mg cm−2 Pt loading on the cathode showed a good performance in PEMFC (~ 0.61 W cm−2) and a high utilization ratio (0.84) of Pt in membrane electrode assembly as compared to Pt/CNT catalyst (~ 0.37 W cm−2 and utilization of 0.29). The higher power density of nitrogen-modified catalysts was ascribed to a higher utilization of Pt in the electrode layer.
9 June 2022 in Russian Technological Journal
Objectives. Scale formation and corrosion are serious problems for heat and power equipment. These processes, when intense, can completely block the operation of the system, accelerating corrosion and leading to clogging, local overheating, and burnouts and ruptures of boilers and pipes, which in turn can lead to major environmental problems. Therefore, protecting surfaces from scale formation and corrosion is an important task. Promising methods for preventing the development of undesirable consequences include changing the composition of polymer coatings, e.g., by introducing microencapsulated corrosion inhibitors, as well as surface modification approaches, such as hydrophobization of the polymer coating surface. The purpose of the present work is to analyze methods for reducing scale formation and the rate of corrosion processes, as well as to study the efficiency of modification of paints and coatings by introducing microencapsulated corrosion inhibitors.Methods. The study was based on the use of accelerated corrosion tests.Results. Existing methods for reducing scale formation and corrosion rate on the surfaces of heat and power equipment were analyzed. The efficiency of modifying protective polymer materials by introducing microcapsules containing an active phosphonate additive was compared with approaches involving the surface modification of such protective materials.Conclusions. It was determined that the modification of paints and coatings by introducing microencapsulated active additives can significantly reduce the rates of both scale formation and corrosion. By implementing stateof-the-art methods for modifying polymer coatings, a new generation of agents for efficiently preventing scale formation and corrosion processes can be developed for maintaining the high performance of heat-exchange equipment.
21 March 2021 in Corrosion: Materials, Protection
????? ??????????, ?????????? ??????????????, ?????????? ??????????, ??????? ???????, ?????? ?? ????????, ?????????? ????????, ???????? ??????????, ??????????? ???????, ????? ? ??????????, ?????????? ??????????, ??????? ??????????
30 August 2023 in Corrosion: material protection and research methods
Эволюция электрохимических свойств и цифровое моделирование композиционных полимерных защитных покрытий в агрессивных средах