1 February 2005 in Polymer Degradation and Stability
8 July 2014 in Journal of Applied Physics
This paper presents a model for indirect photoacoustic response that includes thermal memory effects. At low frequencies, the model reduces to the well-known thermal piston model of photoacoustic response given by Rosencweig and Gersho. However, at high frequencies, the presented model predicts resonant behavior of amplitudes and phases of photoacoustic response and determines the respective resonant frequencies. The results of the presented model enable experimental determination of standard thermal properties of solids (thermal diffusivity and thermal conductivity), as well as thermal memory properties, thermal relaxation time, and heat propagation speed.
1 June 2009 in Polymer Degradation and Stability
JKJ. Kuljanin-Jakovljević
1 January 1995 in Polymer Degradation and Stability
26 January 2010 in Journal of Physics D: Applied Physics
Structural changes in multilayered AlN/TiN nanocomposites upon Ar+ ion irradiation were investigated. Reactive sputtering was used to deposit (AlN/TiN) × 5 multilayers on Si(1 0 0), to a total thickness of ∼270 nm. Argon was implanted at 200 keV, to 5 × 1015–4 × 1016 ions cm−2. The as-deposited multilayers had a very fine columnar nanocrystalline structure, the width of individual grains was up to ∼10 nm. It was found that this immiscible system exhibits a high ion radiation stability, the AlN and TiN layers remaining well separated, with sharp interfaces. Ion irradiation induced small local density changes and only a slight increase in individual grains, in the region where most damage was deposited by the impact ions. For the highest irradiation fluence there was also some migration of Ti into AlN in this region, which was assigned to excess nitrogen within the AlN layers. Due to these small structural changes, ion irradiation enhanced the mechanical strength of the multilayered nanocomposites.
1 February 2000 in Polymer Degradation and Stability