1 August 2014 in Engineering Structures
MBMassimiliano Bocciarelli
15 April 2023 in Engineering Failure Analysis
1 June 2021 in Engineering Structures
1 July 2011 in Applied Mechanics and Materials
The random nature of the explosion load, associated with the random nature of material properties, and geometric dimensional characteristics, implies the need to consider them into the reliability analysis in order to have a more correct estimation of the structural behavior. Therefore, when the randomness of these parameters in the analysis is considered, the response of the structure assumes probabilistic nature, and this makes it necessary to look into the reliability measure. This paper presents results from a parametric investigation of the reliability of reinforced concrete (RC) beam subjected to blast load. The probabilistic responses of the maximum displacement for a reinforced concrete flexural member under blast loadings are evaluated by means of nonlinear dynamic analysis with simplified equivalent single-degree-of-freedom (SDOF) system. Results of numerical simulations have shown the response of structures, in terms of maximum displacement in relation also to the blast load and the geometrical and mechanical characteristics of the beams. Monte Carlo simulation of dynamic response of the equivalent SDOF system is performed to estimate the reliability.
1 December 2021 in Engineering Structures
16 November 2012 in The Open Civil Engineering Journal
A numerical FE homogenization approach for the interpretation of existing crack patterns induced by founda-tion settlement on old masonry buildings is discussed. The approach is quite general and may be applied to any case study. It relies on a 3D FE discretization of the entire structure by means of rigid infinitely resistant six-noded wedge ele-ments and non-linear interfaces, exhibiting deterioration of the mechanical properties. Soil is modeled by means of elastic translational springs, with values derived from at hand simplified approaches. The case study analyzed is the so called “Siloteca” [1] building in Milan, Italy, which belongs to a more complex built ag-gregate, originally conceived by the French Napoleonic army as riding stable during the Cisalpina Republic. At present, the building is utilized as an archive within the Science and Technology Museum. The aggregate may be regarded as be-ing subdivided into two separate blocks, with each one further sub-divided into eight isolated buildings. Nowadays, only six stables of one of the blocks are still present. Two of the six structures now serve as a Museum deposit and are the ob-jects of the present study, whereas the other four are in worst condition, partially roofed and collapsed and in a general de-cayed state. Siloteca exhibits meaningful crack patterns and an active overturning mechanism of the main facade. The masonry face texture is relatively regular and well organized; its section is constituted of three leaves of header bricks, one leaf being alternatively constituted by one-half brick. A quite large sub-vertical crack is present in the central long wall, at a distance of about 10 meters from the main facade, which is progressively rocking. The reason of the façade movements at the base is probably due to differential settlements of the foundation, as a consequence of a large excavation realized some decades ago to install large gas oil tanks for the museum. In this paper, for a direct mechanical interpretation of the reasons at the base of the formation of the crack pattern, a sim-ple but effective fully equilibrated model is discussed, facilitating in the accurate prediction of the position of the cracks. The model is also utilized to estimate soil elastic vertical stiffness –within a Winker approximation- to be used in a second phase with the fully non-linear FE code. Once the soil constants are at disposal from such a procedure, a homogenized non-linear FE code recently proposed by the second author [2, 3] is utilized to have an insight into the state of mechanical degradation of the structure. A hypothesis on foundation settlement is provided to justify the crack maps exhibited by the structure.