We experimentally studied the transition dynamics between consecutive multi-pulsing states, specifically the build-up and annihilation of soliton pulses between a double pulsing and a three-pulse state, utilizing the dispersive Fourier transform technique. The birth of an additional pulse in a mode-locked soliton fiber laser in a multi-pulsing regime arises from a dispersive wave-induced narrow-band pulse that experiences strong intensity fluctuations, while the other soliton pulses maintain their shapes. During the decaying process to a double pulsing state, it is observed that all the pulses undergo a unique breathing behavior before settling into a steady state.
GHz high repetition rate compact sources with femtosecond pulse durations and stable performance can enable a wide range of applications. In this paper, several high repetition rate ultrafast thulium fiber lasers with repetition rates varying between 532 MHz to 1.25 GHz are demonstrated with femtosecond pulse durations down to 426 fs. An approach of maintaining comparable pulse energies while scaling the repetition rates allows high-quality femtosecond mode-locking performance with low noise performance in thulium soliton lasers for the first time.
2 November 2017 in IEEE Journal of Selected Topics in Quantum Electronics
Polarization rotation dynamics for group velocity locked vector solitons in higher order harmonically mode-locked soliton fiber lasers are studied for the first time, in a thulium/holmium fiber laser. In a linear ultrafast fiber laser with net anomalous dispersion, harmonically mode-locked states are generated continuously by increasing the pump power for specific net cavity birefringence settings. The polarization evolution frequency remains the same for all harmonically mode-locked pulse trains, converging toward a singular solution close to the maximum pulse intensity modulation depth for each respective harmonically mode-locked state. With a polarization resolved output, an intensity modulation of the ultrafast pulse train with varying pulse binning is recorded, corresponding to the polarization rotation of the vector solitons. In addition, a polarization rotation vector soliton state with two different sets of RF sidebands symmetric to the repetition rate is observed, which leads to a more complex modulated pulse train. The experimental results of the polarization evolution also matche well with the presented theoretical modeling. Similar relative intensity noise <0.4% for all harmonically mode-locked states is measured. This method to modulate the intensity of an ultrafast pulse train and tune its pulse spacing by integer fractions of the initial round trip time shows a strong potential for applications in optical communications, polarization de multiplexing schemes, and sensing.
10 October 2019 in IEEE Photonics Technology Letters
Femtosecond micromachining offers a contact-free and mask-less technique for material patterning. Femtosecond pulse irradiation of single layer graphene by low energy pulses around 12 nJ over a 15 second illumination period is studied. The ablated graphene holes are surrounded by a radially symmetric region characterized by generated defects, whose extension can be modified based on the laser fluence. The femtosecond induced structural modifications can be attractive for graphene or carbon-based device fabrication as well as sensor and transistor applications, where regions of varying carrier concentrations and different electrical, optical, or physical properties are desired.
We experimentally characterize the dynamics of soliton explosions in a transient chaotic state between a single and double pulsing state, as well as periodic explosions induced by soliton collisions in a dual wavelength soliton state. These explosions occurring in a thulium-doped linear fiber laser with net anomalous dispersion are characterized with real-time measurements based on a modified time-stretched dispersive Fourier transform method relying on second-harmonic generation.