Kailun Yang

Kailun Yang

Auto-generated profile, based on publicly available information

Kailun Yang

Materials for Energy Conversion and Storage (MECS), Department of Chemical Engineering, Faculty of Applied Sciences, Delft University of Technology, Van der Maasweg 9, 2629 HZ Delft, The Netherlands

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 November 2021 in ACS Energy Letters
Verified
Journal Article
Open access
KYKailun Yang
Kailun Yang
MLMengran Li
Mengran Li
SSSiddhartha Subramanian
Siddhartha Subramanian
MBMarijn A. Blommaert
Marijn A. Blommaert
WSWilson A. Smith
Wilson A. Smith
TBThomas Burdyny
Thomas Burdyny
Advancing reaction rates for electrochemical CO2 reduction in membrane electrode assemblies (MEAs) have boosted the promise of the technology while exposing new shortcomings. Among these is the maximum utilization of CO2, which is capped at 50% (CO as targeted product) due to unwanted homogeneous reactions. Using bipolar membranes in an MEA (BPMEA) has the capability of preventing parasitic CO2 losses, but their promise is dampened by poor CO2 activity and selectivity. In this work, we enable a 3-fold increase in the CO2 reduction selectivity of a BPMEA system by promoting alkali cation (K+) concentrations on the catalyst’s surface, achieving a CO Faradaic efficiency of 68%. When compared to an anion exchange membrane, the cation-infused bipolar membrane (BPM) system shows a 5-fold reduction in CO2 loss at similar current densities, while breaking the 50% CO2 utilization mark. The work provides a combined cation and BPM strategy for overcoming CO2 utilization issues in CO2 electrolyzers.

20 December 2021 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
MBMarijn A. Blommaert
Marijn A. Blommaert
SSSiddhartha Subramanian
Siddhartha Subramanian
KYKailun Yang
Kailun Yang
WSWilson A. Smith
Wilson A. Smith
DVDavid A. Vermaas
David A. Vermaas
Typically, anion exchange membranes (AEMs) are used in CO2 electrolyzers, but those suffer from unwanted CO2 crossover, implying (indirect) energy consumption for generating an excess of CO2 feed and purification of the KOH anolyte. As an alternative, bipolar membranes (BPMs) have been suggested, which mitigate the reactant loss by dissociating water albeit requiring a higher cell voltage when operating at a near-neutral pH. Here, we assess the direct and indirect energy consumption required to produce CO in a membrane electrode assembly with BPMs or AEMs. More than 2/3 of the energy consumption for AEM-based cells concerns CO2 crossover and electrolyte refining. While the BPM-based cell had a high stability and almost no CO2 loss, the Faradaic efficiency to CO was low, making the energy requirement per mol of CO higher than for the AEM-based cell. Improving the cathode–BPM interface should be the future focus to make BPMs relevant to CO2 electrolyzers.

3 May 2022 in ACS Applied Energy Materials
Verified
Journal Article
Open access
MSMark Sassenburg
Mark Sassenburg
RRReinier de Rooij
Reinier de Rooij
NNNathan T. Nesbitt
Nathan T. Nesbitt
RKRecep Kas
Recep Kas
SCSanjana Chandrashekar
Sanjana Chandrashekar
TBThomas Burdyny
Thomas Burdyny
Continued advancements in the electrochemical reduction of CO2 (CO2RR) have emphasized that reactivity, selectivity, and stability are not explicit material properties but combined effects of the catalyst, double-layer, reaction environment, and system configuration. These realizations have steadily built upon the foundational work performed for a broad array of transition metals performed at 5 mA cm-2, which historically guided the research field. To encompass the changing advancements and mindset within the research field, an updated baseline at elevated current densities could then be of value. Here we seek to re-characterize the activity, selectivity, and stability of the five most utilized transition metal catalysts for CO2RR (Ag, Au, Pd, Sn, and Cu) at elevated reaction rates through electrochemical operation, physical characterization, and varied operating parameters to provide a renewed resource and point of comparison. As a basis, we have employed a common cell architecture, highly controlled catalyst layer morphologies and thicknesses, and fixed current densities. Through a dataset of 88 separate experiments, we provide comparisons between CO-producing catalysts (Ag, Au, and Pd), highlighting CO-limiting current densities on Au and Pd at 72 and 50 mA cm-2, respectively. We further show the instability of Sn in highly alkaline environments, and the convergence of product selectivity at elevated current densities for a Cu catalyst in neutral and alkaline media. Lastly, we reflect upon the use and limits of reaction rates as a baseline metric by comparing catalytic selectivity at 10 versus 200 mA cm-2. We hope the collective work provides a resource for researchers setting up CO2RR experiments for the first time.

22 April 2022 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Open access
RKRecep Kas
Recep Kas
KYKailun Yang
Kailun Yang
GYGaurav P. Yewale
Gaurav P. Yewale
ACAllison Crow
Allison Crow
TBThomas Burdyny
Thomas Burdyny
WSWilson A. Smith
Wilson A. Smith