1 June 2023 in Journal of Fluid Mechanics
In this work, the modelling of collisional bedload transport is investigated with a focus on the continuum modelling of the granular flow. For this purpose, a frictional–collisional approach, combining a Coulomb model with the kinetic theory of granular flows, is developed. The methodology is based on a comparison with coupled fluid–discrete simulations that the classical kinetic theory model fails to reproduce. This inaccuracy may be explained by the assumptions of negligible interparticle friction and the absence of a saltation model in the continuum approach. In order to provide guidelines for the modelling, the fluctuating energy balance is computed in the discrete simulations and systematically compared with the kinetic theory laws. Interparticle friction is shown to affect the radial distribution function and to increase the energy dissipation, in agreement with previous observations. In addition, a saltation regime is identified, leading to departure from the viscosity and pseudo-thermal diffusivity laws of the kinetic theory in the dilute regime. Based on these observations, modifications to account for interparticle friction are included in the two-fluid model, and the kinetic theory is coupled with a saltation model. The results show that for inelastic frictional particles, interparticle friction controls energy dissipation, and the macroscopic behaviour of the granular flow does not depend on the microscopic particle properties. The proposed model reproduces the $\mu (I)$ rheology in the dense regime of the granular flow. Finally, the model is evaluated with experiments, showing significant improvements concerning the granular flow modelling.
26 May 2020 in Journal of Fluid Mechanics
Grain-scale discrete element simulations of bidisperse mixtures during bedload transport are used to understand, and model, bedload transport and particle-size segregation in granular media. For an initial distribution of fine particles on top of a coarse granular bed, this paper investigates the gravity driven percolation/segregation of the fine particles down into the quasi-static part of the bed. The segregation is observed to be driven by the inertial number at the bottom of the fine particle layer, and is independent of the number of fine particles. A novel travelling wave solution for the evolving concentration distribution is constructed using the continuum particle-size segregation model of Thornton, Gray & Hogg (J. Fluid Mech., vol. 550, 2006, pp. 1–25) and Gray & Chugunov (J. Fluid Mech., vol. 569, 2006, pp. 365–398). The observed behaviour is shown to be related to a local equilibrium between the influence of the concentration and of the inertial number. The existence of the exact solution relies on the segregation flux and the diffusion coefficient having the same dependency on the inertial number. This functional dependence allows the continuum model to quantitatively reproduce the discrete simulations. These results significantly improve on our understanding of the size segregation dynamics and represent a step forward in the up-scaling process to polydisperse granular flows in the context of turbulent bedload transport.
14 May 2019 in Journal of Fluid Mechanics
In this paper a detailed analysis of undular bore dynamics in channels of variable cross-section is presented. Two undular bore regimes, low Froude number (LFN) and high Froude number (HFN), are simulated with a Serre–Green–Naghdi model, and the results are compared with the experiments by Treske (1994). We show that contrary to Favre waves and HFN bores, which are controlled by dispersive non-hydrostatic mechanisms, LFN bores correspond to a hydrostatic phenomenon. The dispersive-like properties of the LFN bores is related to wave refraction on the banks in a way similar to that of edge waves in the near shore. A fully hydrostatic asymptotic model for these dispersive-like bores is derived and compared to the observations, confirming our claim.
18 November 2020 in Physical Review Fluids
The flow of segregated bidisperse assemblies of particles is of major importance for geophysical flows and bedload transport in particular. In the present paper, the mobility of strictly bidisperse segregated particle beds is studied with a coupled fluid discrete element method (DEM). Large particles are initially placed above small ones in a three-dimensional domain inclined at a slope of . A gravity-driven water free surface flow induces a downslope shear-driven granular flow of the erodible bed. It is observed that, for the same water flow conditions, the bedload transport rate is higher in the bidisperse configuration than in the monodisperse one. Depending on the Shields number and on the depth of the interface between small and large particles, different transport phenomenologies are observed, ranging from no influence of the small particles to small particles reaching the bed surface due to diffusive remixing. In cases where the small particles hardly mix with the overlying large particles and for the range of studied size ratios , it is shown that the increased mobility is not a bottom roughness effect, that would be due to the reduction of roughness of the underlying small particles, but a granular flow effect. This effect is analyzed within the framework of the rheology, modeling the stress to strain rate relation for dense granular flows. It is demonstrated that the buried small particles are more mobile than larger particles and play the role of a “conveyor belt” for the large particles at the surface. Based on rheological arguments, a simple predictive model is proposed for the additional transport in the bidisperse case. It reproduces quantitatively the DEM results for a large range of Shields numbers and for size ratios smaller than 4. The results of the model are used to identify four different transport regimes of bidisperse mixtures, depending on the mechanism responsible for the mobility of the small particles. A phenomenological map is proposed for bidisperse bedload transport and, more generally, for any granular flow on an erodible bed.
12 April 2021 in Journal of Fluid Mechanics
Gravity-driven size segregation is important in mountain streams where a wide range of grain sizes are transported as bedload. More particularly, vertical size segregation is a multi-scale process that originates in interactions at the scale of particles with important morphological consequences for the river bed. To address this issue, a volume-averaged multi-phase flow model for immersed bi-disperse granular flows was developed based on an interparticle segregation force (Guillard et al., J. Fluid Mech., vol. 807, 2016, R1) and a granular Stokesian drag force (Tripathi & Khakhar, J. Fluid Mech., vol. 717, 2013, pp. 643–669). An advection–diffusion model was derived from this model yielding parametrisations for the advection and diffusion coefficients based on the interparticle interactions. This approach makes it possible to bridge the gap between grain-scale physics and continuum modelling. Both models were successfully tested against existing discrete element model (DEM) simulations of size segregation in bedload transport (Chassagne et al., J. Fluid Mech., vol. 895, 2020, A30). Through a detailed investigation of the granular forces, it is demonstrated that the observed scaling of the advection and diffusion coefficients with the inertial number can be explained by the granular drag force dependency on the viscosity. The drag coefficient is shown to be linearly dependent on the small particle concentration. A new scaling relationship for the segregation force including the small particle concentration and the pressure is proposed. Lastly, adding a size-ratio dependency in the segregation force fairly reproduces the DEM results for a large range of small particle concentrations and size ratios.
2 February 2026 in Limnology and Oceanography Letters
The presence of vegetation in aquatic environments alters hydrodynamics and sediment resuspension. A recent paradigm has suggested that turbulent kinetic energy (TKE) serves as a better predictor of sediment transport in aquatic canopies than bed shear stress. This observation has led to the development of formulations to predict TKE for vegetated flows in the laboratory. However, model validation from natural heterogeneous field environments is lacking. Here, we explore the application of laboratory‐based formulas in a real environment, characterized by multiple vegetation length scales. We measured turbulence within a sparse canopy of mangrove pneumatophores and saplings during an experimental period with negligible wind‐wave activity. The existing formulations for TKE performed well in the field, but only when using the measured values for horizontal eddy length scales. These length scales accounted for the generation of additional turbulence from the surrounding sapling canopy, leading to notably larger TKE values than in similar laboratory experiments.