27 September 2023 in ACS Sustainable Chemistry & Engineering
29 November 2013 in Wood Science and Technology
23 November 2021 in ACS Sustainable Chemistry & Engineering
Textile-based wearable sensors integrated into daily wear offer opportunities for on-demand, real-time self-diagnosis to monitor health conditions with changing environmental surroundings and hazards. One still underrated environmental hazard is accumulated UV irradiation, causing skin burns, accelerated aging, and skin cancers. Here, we have demonstrated a sustainable fiber manufacture process to integrate photochromic hackmanite micro-particles directly into a cellulose body to achieve UV-sensing functionality in daily-life textiles. The hackmanite particles were dispersed into an ionic liquid cellulose dope using ultrasonication and nanofibrillated cellulose as a dispersant, resulting in good spinnability. The obtained fibers possess high mechanical strength with up to 10% photochromic hackmanite loading. To demonstrate its application in wearable UV sensors, the fibers were spun into yarn and then knitted into a piece of jersey fabric. The coloration of hackmanite-incorporated textiles under UV irradiation is readily quantified by image analysis using red–green–blue ratios, which was further utilized for UV dosimetry with a smartphone application showcasing the practical use of the UV sensor. The UV-sensing functionality remained the same after intensive washing and abrasion tests, further demonstrating the feasibility of its application in everyday garments.
29 August 2023 in ACS Omega
Superbase-based ionic liquids (ILs) have demonstrated excellent dissolution capability for cellulose, and employing the dry-jet wet spinning process, high-tenacity regenerated textile fibers have been made. Among a range of superbase-based ILs, [mTBDH][OAc] exhibited not only good spinnability but also exceptional recyclability, making it highly suitable for a closed-loop production of regenerated cellulose fibers. To further optimize the spinning process, we investigated the influence of the cellulosic raw materials and the IL with residual water on spinnability and fiber properties. In addition, single-filament spinning and multifilament spinning using spinnerets with different hole densities were investigated to reveal the upscaling challenges of the dry-jet wet spinning process. The air gap conditions, for example, temperature and moisture concentration were simulated using COMSOL multiphysics. The results indicate that the presence of a small amount of water (3 wt%) in the IL has a positive effect on spinnability, while the mechanical properties of the fibers remain unchanged.
16 April 2025 in Materials Advances
Fiber-based constructs have been produced as an alternative to conventional dressings for the treatment of chronic wounds (CWs), showing good tenability, high surface area and regulable porosity.
4 October 2024 in ACS Omega
This study highlights the substantially improved hydrothermal stability of 7-methyl-1,5,7-triazabicyclo[4.4.0] dec-5-enium [mTBDH]+ in [mTBDH][MeOCH2COO] compared to [mTBDH][OAc], as well as the strong cellulose dissolution capability of [mTBDH][MeOCH2COO] and excellent spinnability with a maximum draw ratio of 14. These findings demonstrate the high potential of using [mTBDH][MeOCH2COO] as the solvent to advance Ioncell fiber spinning technology by reducing the hydrolysis rate of [mTBDH](+), thereby minimizing loss during solvent recycling processes.