31 October 2012 in The Journal of Physical Chemistry C
15 January 2011 in Journal of Applied Physics
Thermal imaging of individual silicon nanowires (Si NWs) is carried out by a scanning thermal microscopy (SThM) technique. The vertically aligned 1.7 μm long Si NWs are fabricated combining nanosphere lithography and metal-induced wet chemical etching. A thermal model for the SThM probe is then presented with two steps: a model out of contact which enables a calibration of the probe, and a model in contact to extract thermal parameters from the sample under study. Using this model and the experimental thermal images, we finally determine a mean value of the tip-to-sample thermal contact resistance and a mean value of the Si NWs thermal conductivity. No significant thermal conductivity reduction in comparison with bulk Si is observed for Si NWs with diameters ranging from 200 to 380 nm. However, the technique presented here is currently the only one available to perform thermal measurements simultaneously on an assembly of individual one-dimensional nanostructures. It enables to save time and to make a statistical processing of the thermal data in order to deduce a reliable mean thermal conductivity, even when the tip-to-sample thermal contact resistance cannot be considered neither negligible in comparison with the Si NW intrinsic thermal resistance nor constant from one Si NW to another.
1 July 2010 in Review of Scientific Instruments
In scanning thermal microscopy (SThM) techniques, the thermal exchange radius between tip and sample is a crucial parameter. Indeed, it limits the lateral spatial resolution but, in addition, an accurate value of this parameter is necessary for a precise identification of thermal properties. But until now, the thermal exchange radius is usually estimated but not measured. This paper presents an experimental procedure, based on the 3ω-SThM method, to measure its value. We apply this procedure to evaluate the thermal exchange radius of two commercial probes: the well-known Wollaston one and a new probe constituted of a palladium film on a SiO2 substrate. Finally, presenting silicon nanowire images, we clearly demonstrate that this new probe can reach a spatial resolution better than 100 nm whereas the Wollaston probe hardly reaches a submicronic spatial resolution.
30 July 2014 in ACS Applied Materials & Interfaces
12 March 2018 in Nanoscale
Photochromic coordination polymers, based on zinc( ii ) bis-terpyridine-appended dimethyldihydropyrene building blocks, have been synthesized following stepwise synthesis on a surface yielding photo-switchable molecular junctions.
21 August 2012 in The Journal of Physical Chemistry C