The details of the charged particle separation by mass in the configuration with axial magnetic and radial electric fields are studied. The radial electric field, oriented to the discharge axis, is induced in a background reflex discharge with a hot cathode (−550 V, 8–14 A). The plasma source is based on a hot cathode arc discharge with independent metal vapor injection (18–21 V, 30 A) was situated at 18 cm from the axis. It was shown that the separated Ag + Pb mixture is transported across the magnetic field under the background discharge electric field. Effective separation is possible in such a system, while the separation coefficient increases from 4.9 to 6.2–8.4 when the mixture injection point is moved away from the background discharge axis from 18 to 23 cm. The effect of mixture injection on the plasma potential distribution is examined. It was shown that the presence of a plasma source of separated substances can cause a local (1–2 cm) distortion of the background plasma potential profile. Such distortion, as well as fluctuations of the background plasma potential, can significantly affect the width of the deposited spots of separated substances.
22 January 2021 in Plasma Physics and Controlled Fusion
One of the alternative ‘dry’ methods for spent nuclear fuel (SNF) reprocessing is the plasma mass separation technique. This letter describes the first experiments that demonstrate the fundamental feasibility of a plasma mass separation approach in crossed electric and magnetic fields in collisionless mode. The Ag + Pb mixture was used to simulate the heavy (>235 u) and light (<150 u) components of the SNF. The Ag + Pb mixture was transformed into a plasma jet and ejected along the magnetic field. The action of the electric field caused the deposition of mixture components on the substrate in the form of localized spots. The estimated separation factor was of 35.
1 September 2023 in Plasma Sources Science and Technology
This work is devoted to the modeling of a Penning discharge with a hot cathode, which is used to create a background plasma with a radial electric field in a plasma mass separator. We used a 2D3V electrostatic particle-in-cell plus Monte Carlo Collision (PIC/MCC) simulation model with a gyrokinetic approximation for magnetized electrons and a geometrical scaling scheme. The proposed model predicts the development of a rotating spoke structure, leading to fluctuations in the electric potential. The fluctuation amplitude and the averaged radial profile of the potential are in qualitative agreement with experiment. On the example of a model flow of silver and lead ions, we have shown that potential fluctuations can impair separation, leading to a partial overlap of ion deposition spots on a substrate. Each of the separated fractions contain about 11% impurities.
15 September 2021 in Physical Chemistry Chemical Physics
The formation of mixed-ligand europium(III) complexes with tetracycline and iminodiacetic acid grafted to the surface of silica has been studied. This complex is suggested for luminescence determination of tetracycline in solutions.
1 March 2006 in Instruments and Experimental Techniques
A high-voltage transistor voltage divider for photomultiplier tubes consists of a high-resistance linear resistive divider specifying potential distributions between dynodes and emitter followers maintaining this distribution. The divider features a low dissipation power and stable gain of the photomultiplier tube, when the average anode current varies in the entire measurement range.