22 January 2024 in Light: Science & Applications
Classical and quantum space-to-ground communications necessitate highly sensitive receivers capable of extracting information from modulated photons to extend the communication distance from near-earth orbits to deep space explorations. To achieve gigabit data rates while mitigating strong background noise photons and beam drift in a highly attenuated free-space channel, a comprehensive design of a multi-functional detector is indispensable. In this study, we present an innovative compact multi-pixel superconducting nanowire single-photon detector array that integrates near-unity detection efficiency (91.6%), high photon counting rate (1.61 Gcps), large dynamic range for resolving different photon numbers (1–24), and four-quadrant position sensing function all within one device. Furthermore, we have constructed a communication testbed to validate the advantages offered by such an architecture. Through 8-PPM (pulse position modulation) format communication experiments, we have achieved an impressive maximum data rate of 1.5 Gbps, demonstrating sensitivities surpassing previous benchmarks at respective speeds. By incorporating photon number information into error correction codes, the receiver can tolerate maximum background noise levels equivalent to 0.8 photons/slot at a data rate of 120 Mbps—showcasing a great potential for daylight operation scenarios. Additionally, preliminary beam tracking tests were conducted through open-loop scanning techniques, which revealed clear quantitative dependence indicating sensitivity variations based on beam location. Based on the device characterizations and communication results, we anticipate that this device architecture, along with its corresponding signal processing and coding techniques, will be applicable in future space-to-ground communication tasks.
17 October 2011 in Applied Physics Letters
We designed and fabricated planar terahertz (THz) metamaterials made from superconducting NbN films to mimic electromagnetically induced transparency (EIT) system. They are characterized using THz time domain spectroscopy over a temperature range from 8 to 300 K. High transmittance and large delay-bandwidth product at transparency window are demonstrated, which mainly arise from the enhanced coupling and decreased damping in superconducting state. The EIT-like spectral response could be tuned in a wide frequency range. By applying two dark resonators with different resonance frequencies coupled with a radiative resonator, we experimentally demonstrated the planar metamaterials mimicking four-level EIT system.
6 June 2011 in Optics Express
Superconducting planar terahertz (THz) metamaterials (MMs), with unit cells of different sizes, are fabricated on 200 nm-thick niobium nitride (NbN) films deposited on MgO substrates. They are characterized using THz time domain spectroscopy over a temperature range from 8.1 K to 300 K, crossing the critical temperature of NbN films. As the gap frequency (fg = 2Δ0/h, where Δ0 is the energy gap at 0 K and h is the Plank constant) of NbN is 1.18 THz, the experimentally observed THz spectra span a frequency range from below fg to above it. We have found that, as the resonance frequency approaches fg, the relative tuning range of MMs is quite wide (30%). We attribute this observation to the large change of kinetic inductance of superconducting film.
12 December 2022 in Applied Physics Letters
We acquire tantalum thin film in its α phase (α-Ta) using direct-current magnetron sputtering. According to x-ray diffraction results, 110-Ta is dominant. Quarter-wavelength coplanar waveguide resonators are fabricated with the α-Ta film and characterized at millikelvin in a dilution refrigerator. In the single photon regime, an intrinsic quality factor (Qi) up to is obtained in these resonators. At high power, Qi rises to . Moreover, we also fabricate an array with 7 × 7 lumped element resonators using the α-Ta film. The array shows excellent uniformity. At high power, Qis of all pixels exceed . In the single photon regime, Qis of over 90% pixels exceed . Superconducting quantum computing and ultrasensitive electromagnetic wave detectors will benefit a lot from devices based on the α-Ta film.
4 August 1997 in Applied Physics Letters
Using high- Josephson junctions made of deposited across MgO bicrystal boundary, at terahertz (THz) frequency band, we demonstrated both fundamental and harmonic mixing. Radiation from a far-infrared laser was coupled to the junction, which was integrated with a planar bow-tie antenna, via an extended hyperhemispherical silicon lens. Fundamental mixing manifested itself in the junction’s dc current–voltage (I–V) curve as a third Shapiro step in addition to those two induced by the THz laser lines from a slightly misaligned resonator. In harmonic mixing between a THz laser line and a microwave local oscillator, the highest harmonic number we could get was 490 with a signal-to-noise ratio of 9 dB at the intermediate frequency.
2 July 2024 in Nature Communications
Efficiently fabricating a cavity that can achieve strong interactions between terahertz waves and matter would allow researchers to exploit the intrinsic properties due to the long wavelength in the terahertz waveband. Here we show a terahertz detector embedded in a Tamm cavity with a record Q value of 1017 and a bandwidth of only 469 MHz for direct detection. The Tamm-cavity detector is formed by embedding a substrate with an Nb5N6 microbolometer detector between an Si/air distributed Bragg reflector (DBR) and a metal reflector. The resonant frequency can be controlled by adjusting the thickness of the substrate layer. The detector and DBR are fabricated separately, and a large pixel-array detector can be realized by a very simple assembly process. This versatile cavity structure can be used as a platform for preparing high-performance terahertz devices and opening up the study of the strong interactions between terahertz waves and matter.