27 July 2021 in Physical Review Applied
We present the autofocusing and self-healing properties of aberration laser beams (ALBs) in a turbulent media. The ALB is generated by a diffractive optical element (DOE) whose phase profile consists of radial and periodic angular dependence, and then propagated through a turbulent media under weak, moderate, and strong turbulence conditions. The theoretical calculations, numerical simulations, and experimental results are presented. The results show that the presence of turbulence leads to distortion in the spatial structure of ALBs, as well as causes beam wandering. However, the autofocusing properties of ALBs remain invariant. Further, ALBs also possess self-healing abilities in free space as well as in a turbulent media. The self-healing sustains reasonably well even when a large portion of ALB (approximately ) is truncated. The distance requires for the self-healing of truncated ALBs remains the same for various percentage of truncation. Particularly, for any amount of truncation up to approximately , ALB self-heals by propagating up to autofocusing distance corresponding to a nontruncated beam.
31 July 2023 in Optics & Laser Technology
30 January 2025 in Journal of Optics
Structured light with self-healing properties against partial obstructions has gained significant interest due to its potential applications in both fundamental and applied sciences. Here, we present a comprehensive investigation on the self-healing properties of the topological structure of optical skyrmionic beams, by exploiting numerical simulation and experimental spatial light modulation. It is shown that the standard skyrmionic beams exhibit a strong self-healing ability, as revealed by the rapid increase in the skyrmion number after obstacles. Moreover, the skyrmionic beams possess better self-healing ability against disk-type obstacles at the beam center than aperture-type obstacles at the periphery. Our results indicate the robustness of topologically structured beams against various obstructions, guiding practical applications such as robust information transfers.
19 September 2024 in Journal of Applied Physics
We present a novel method for generating optical vortex needle beams (focused optical vortices with extended depth-of-focus) using a compact flat multilevel diffractive lens (MDL). Our experiments demonstrate that the MDL can produce focused optical vortices (FOVs) with topological charges l=1−4 (extendable to other l values), maintaining focus over distances significantly longer than conventional optical vortices. Specifically, FOVs exhibit non-diffracting behavior with a depth-of-focus (DOF) extended beyond 5 cm, compared to conventional optical vortices, which show continuous size increase due to diffraction. When the MDL is illuminated by an optical vortex of 3 mm diameter, it achieves a transmission efficiency of approximately 90% and extends the DOF several times beyond that of traditional lenses. Increasing the size of the input optical vortex further extends the DOF but introduces additional rings, with their number increasing proportionally to the value of l. Our approach, validated by both experimental results and numerical simulations, proves effective for beams such as optical vortex and Hermite-Gaussian modes and holds potential applications in high-resolution imaging, material processing, optical coherence tomography, and three-dimensional optical tweezers, offering a simple and efficient solution for generating non-diffracting beams.
24 December 2024 in Optics & Laser Technology