Early prediction of the transient stability of power systems after fault occurrences has a great impact on the performance of wide area protection and control systems designed against transient instabilities. In this paper, an artificial neural networks based methodology is proposed for predicting the power system stability directly after clearing the fault. A dataset is generated to train a multilayer perceptron off-line, which is then used for early online prediction of any transient instability. The neural network is fed by the inputs, which are the pre-fault, during-fault, and post-fault voltage magnitude measurements collected from the phasor measurement units. The success and the effectiveness of the proposed method are demonstrated, as it is applied to the 37-generator 127-bus power test system and an accuracy above 99% is obtained in the early prediction of transient instabilities.
Online monitoring of the power system is a vital application for enhancing the situational awareness capabilities of the system. Rapid integration of phasor measurement units in the network enables transmission system operators to analyze the events in real time due to their high reporting rates. Real-time detection and classification of the fault related events as no-fault, fault-incidence, fault-on and post-fault stage with no further disturbance, is an important requirement in order to decide on the control actions to protect the system from any instability. In this paper, a sliding window based continuous online monitoring method of the power system using convolutional neural networks is proposed. The effectiveness of the proposed method is validated on the 127-bus Western Systems Coordinating Council test system.
Among the power system corrective controls, defensive islanding is considered as the last resort to secure the system from severe cascading contingencies. The objective is to maintain the stability of the resulting subsystems and to reduce the total loss of load in the system. The slow coherency based islanding can successfully be applied for the defensive islanding. In this paper, two new partitioning methods, hierarchical clustering and clustering using self-organizing maps neural networks, have been proposed to determine the clusters to be used in the defensive islanding. The proposed methods are demonstrated on the 16-generator 68-bus power system and their performances are discussed as their results are compared.
Recently, technological developments in PMUs have led to a widespread deployment of PMUs in electrical power systems to carry out many online applications, thanks to their high reporting rates and synchronized measurements. Since it may not be feasible to deploy a PMU on every bus in the system, a selected number of buses can be chosen for the deployment of PMUs to achieve a certain task. In this paper, a new PMU placement method based on feature selection algorithms for obtaining a high accuracy in early predicting of transient instabilities is proposed. The optimal PMU locations are selected according to two different feature selection methods, which are filtering based and feature importance based algorithms. The feature selection methods are implemented with the use of a classifier based on LightGBM. The proposed method is demonstrated on the 127-bus Western Systems Coordinating Council test system.
A fast and accurate transient stability assessment is essential for maintaining the reliability and integrity of the power system where quick corrective control actions are to be taken to prevent cascading outages. In this work, two separate classifiers based on long short-term memory networks are proposed to predict the stability status of a power system after being subjected to a credible fault. These classifiers use the immediate post-fault measurements of bus voltage magnitudes and rate of change of frequencies obtained from phasor measurement units during the first few cycles of the post-fault period. The proposed method does not assume that every bus is equipped with a PMU. It is found out that, even with only 30% of buses equipped with PMUs, the proposed classifiers are able to predict the stability status with an accuracy above 97%. Robustness of the classifiers is also investigated under noisy conditions and against the scenario of missing PMU measurements. A comparison between the two proposed classifiers is conducted by means of a t-test.