Ultraviolet (UV) nanoimprint lithography consists of molding–demolding and lithographic etching processes, which enable the shape transfer of molded resist patterns to underlying substrate surfaces. UV nanoimprint lithography has been applied in various fields, including optics, electronics, biology, and energy engineering. An important key to shape transfer through resist masks is to level the thicknesses of thin residual layers. To solve this issue, the region-selective placement of UV-curable droplets on a substrate is effective for leveling the thickness of the residual layer regardless of the differences in mold pattern density. Herein, we developed laser-drilled screen printing that allows the quantitative placement of high-viscosity UV-curable liquids on substrate surfaces via screen printing using a polyimide through-hole stencil mask prepared via ultrashort-pulse laser drilling. This review explains the practical demonstrations of UV nanoimprint lithography involving laser-drilled screen printing: nano/micro fabrication of Au split ring resonators, Au four-terminal electrodes, and silicon line patterns.
By scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM–EDS), we investigated the elemental depth profiles of organic electron beam resist films after the sequential infiltration synthesis (SIS) of inorganic alumina. Although a 40-nm-thick poly(methyl methacrylate) (PMMA) film was entirely hybridized with alumina, an uneven distribution was observed near the interface between the substrate and the resist as well as near the resist surface. The uneven distribution was observed around the center of a 100-nm-thick PMMA film. The thicknesses of the PMMA and CSAR62 resist films decreased almost linearly as functions of plasma etching period. The comparison of etching rate among oxygen reactive ion etching, C 3 F 8 reactive ion beam etching (RIBE), and Ar ion beam milling suggested that the SIS treatment enhanced the etching resistance of the electron beam resists to chemical reactions rather than to ion collisions. We proposed oxygen- and Ar-assisted C 3 F 8 RIBE for the fabrication of silica imprint molds by electron beam lithography.
17 May 2016 in Japanese Journal of Applied Physics
We demonstrated a coating method of screen printing for discharging droplets of a high-viscosity resin on a substrate for ultraviolet (UV) nanoimprint lithography (NIL). Compared with a spin-coated resin film on a silicon substrate, discharged resin droplets on a silicon substrate were effective in terms of the uniformity of residual layer thickness (RLT) in contact with a mold with various pattern densities. Fluorescence microscope observations with a fluorescent-dye-containing UV-curable resin enabled the evaluation of the shapes of resin droplets discharged on a substrate surface. Widely used screen mesh plates composed of a stainless mesh covered with a patterned emulsion film caused defects of undischarged parts, whereas defects-free resin droplets with a narrow size distribution were discharged by mesh-free plates prepared with laser ablation. The pitch-to-diameter ratio in the configuration of 10-µm-diameter holes needs to be larger than 2.5 times for printing a resin having a viscosity of 12,800 mPa s.