1 February 2019 in Journal of Materials Processing Technology
17 October 2016 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
A finite element model has been developed to determine the effectiveness of a cold compression technique to reduce the large residual stresses generated from quenching solution heat treated T-section components of aluminium alloy AA7050. To compress long components, a multi-step process is required with some amount of overlap. A parametric study has been performed to determine the effect of the compression ratio, friction coefficient, length of overlap and length of the T-section component on the residual stress distribution post-quenching and after subsequent cold compression. Generally, a percentage reduction in the peak residual stress of over 90% was found. The optimal parameters for residual stress relief by cold compression have been suggested from the cases considered.
14 November 2018 in Materials and Manufacturing Processes
This article describes a novel cold working method for relaxing residual stresses in extra-long quenched T-section panels. Distortion led by quench-induced residual stresses in components is usually a great concern for the aviation industry. In this study, the influence of cold rolling on the residual stresses in a scale-down quenched AA7050 T-section specimen is experimentally and numerically investigated. An integrated numerical model was built to predict the quenching and the subsequent cold rolling processes. High levels of compressive stress around the surfaces of quenched T-profile specimens and the tensile surface residual stresses (RS) in the quenched and cold rolled specimens were predicted via numerical analysis, the surface stresses magnitude and distribution have, therefore, been quantified via X-ray diffraction (XRD) technique. The deflection of quenched specimens experienced 1.5% and 3% cold rolling was measured as well. In addition, to examine the cold rolling effect on the mechanical properties of T-profile specimens, hardness tests were carried out on quenched and cold rolled T-section specimens. It concludes that with 1.5% cold rolling the residual stresses in the core part of quenched material can be effectively relieved to an extent of lower than 83 MPa, with limited change for the material properties.
1 January 2017 in Procedia Engineering
25 October 2015 in Journal of Systems Science and Information
The standard semi-supervised support vector machine (S3VM) is an unconstrained optimization problem of non-convex and non-smooth, so many smooth methods are applied for smoothing S3VM. In this paper, a new smooth semi-supervised support vector machine (SS3VM) model , which is based on the biquadratic spline function, is proposed. And, a hybrid Genetic Algorithm (GA)/ SS3VM approach is presented to optimize the parameters of the model. The numerical experiments are performed to test the efficiency of the model. Experimental results show that generally our optimal SS3VM model outperforms other optimal SS3VM models mentioned in this paper.