26 October 2022 in ACS Omega
Dissolved Gas Analysis (DGA) of insulating oil is widely used for diagnosing transformer incipient faults. Moisture is a major contaminant and degradation byproduct of transformer insulating oil. In this paper, molecular dynamics simulation was used to study the influence of moisture on the diffusion movement of dissolved gases in the insulating oil. Cycloalkanes (C20H42), alkanes (C20H38), and aromatic hydrocarbons (C20H26) are selected as the basic structural units in the constructed transformer oil simulation system. 0%, 1%, 3%, and 5% moisture molecules are added to insulating oil, respectively, and the insulating oil generates seven kinds of gas molecules through cracking. With an anhydrous model used as a benchmark, we researched the diffusion trajectory, the diffusion coefficient (D), free volume (V F), and the moisture-gas interaction energy of each gas molecule as a function of moisture content. Through this study, we found that the increase of moisture content enlarges the V F value of dissolved gas in insulating oil, which makes the gas in oil easier to diffuse. Besides, the moisture can also alter the mean square displacement (MSD) of dissolved gases; the mutual energy of molecules is mainly affected by the electrostatic interaction energy. This study can contribute to a better understanding of the influence of different moisture contents on the diffusion movement of dissolved gas in transformer oil from the micro level.
31 January 2022 in IEEE Transactions on Dielectrics and Electrical Insulation
The present paper studies the effects of temperature and stress type on the oil/pressboard creeping discharge under divergent AC voltage. A ramp-stress test determines the short-time electric strengths of the oil/pressboard interface. Subsequently, long-term tests are carried out at different temperatures using constant and step stresses, respectively. Afterwards, a novel methodology is proposed to detect the developing fault using synchronous partial discharge (PD) and online dielectric measurements. The interface short-time electric strengths correlate positively with the temperature. In long-term tests, the creeping discharges can generate three failure modes to oil/pressboard insulation: interface flashover, surface tracking, and internal treeing. Different failure modes vary significantly in the discharge characteristics and the severities of damage to the pressboard. Temperature plays an important role in determining the failure modes of creeping discharge, and its influence mechanism is expounded in terms of the change of material properties, the interface electric and dielectric phenomena, and their sophisticated interplays. The influence of stress type is related to the cumulative effect of stressing and the voltage rising steepness. The proposed methodology proves a potent tool in detecting the developing internal treeing.
20 October 2022 in Journal of Electrical Engineering & Technology