The field of P-band (0.3–1 GHz) absorption has witnessed rapid development in metamaterial absorbers due to their exceptional designability and the absence of restrictions imposed by the one-fourth wavelength rule. In this study, we combined carbonyl iron powder (CIP) composites with a periodic structure composed of metal capacitive patterns and employed a genetic algorithm (GA) to optimize the electromagnetic parameters of the CIP substrate. By selecting the appropriate shape and material for the units of pattern based on transmission line theory, as well as regulating relevant structural parameters, we successfully designed an ultra-thin broadband metamaterial absorber for the P-band. Experimental results demonstrate that within the range of 0.3–0.85 GHz, the reflection loss of our absorber remains below −5 dB, with a maximum value of −9.54 dB occurring at 0.45 GHz. Remarkably, this absorber possesses a thickness equivalent to only 1/293 of its working wavelength. Then, we conducted analyses on electric field distribution, magnetic field distribution, and energy loss density. Our findings suggest that high-performance absorption in metamaterials can be attributed to λ/4 resonant or coupling effects between structural units or diffraction phenomena. This absorber offers several advantages, including broad low-frequency absorption capability, ultra-thin profile, and convenient fabrication process, thus providing valuable theoretical insights for designing metamaterial structures.
15 October 2025 in Progress in Additive Manufacturing
Auxetic structures have garnered considerable interest for being lightweight and exhibiting superior properties such as an excellent energy absorption capability. In this paper, re-entrant and missing rib square grid auxetic structures were additively manufactured via the fused deposition modeling technique using two types of polyether imide materials: ULTEM 9085 and ULTEM 1010. In-plane quasi-static compressive tests were carried out on the proposed structures at different relative densities to investigate the Poisson’s ratio, equivalent modulus, deformation behavior, and energy absorption performance. Finite element simulations of the compression process were conducted, which confirmed the deformation behavior observed in the experiments. It was found that the Poisson’s ratio and normalized equivalent Young’s modulus of ULTEM 9085 and ULTEM 1010 with the same geometries were very close, while the energy absorption of the ductile ULTEM 9085 was significantly higher than that of the brittle ULTEM 1010 structures. Furthermore, a linear correlation exists between the relative density and specific energy absorption of missing rib square grid structures within the investigated relative density range, whereas the relationship for re-entrant structures follows a power law. This study provides a better understanding of how material properties influence the deformation behavior and energy absorption characteristics of auxetic structures.