4 October 2019 in Environmental Earth Sciences
3 December 2019 in Marine Georesources & Geotechnology
Solidified sludge, a potentially useful engineering material, contains organic matter that decomposes, releasing humic acid. The resultant corrosion reduces the compressive strength of the solidified sludge. This can be ameliorated by adding small quantities of lime and cement, which creates a strongly alkaline environment; unfortunately, the improvement is not long-lasting. We attempted to counteract this by adding metakaolin, which can capture calcium ions and form a stable binder in the solidified soil. The resulting material proved strongly resistant to the erosive effect of humic acid, improving and maintaining the durability throughout the curing period (180 days).
13 October 2023 in Journal of Material Cycles and Waste Management
14 August 2021 in Environmental Earth Sciences
24 June 2022 in KSCE Journal of Civil Engineering
Bentonite-sand mixtures can be used as the base material of engineered barriers in deep high-level radioactive waste geological repositories. Swelling, compression, and permeability tests were conducted out on bentonite-sand mixtures with 30%, 50%, 70% and 85% sand content. Influence of sand content and particle size on the deformation and permeability characteristics of bentonite-sand mixtures were analyzed. The sand particle size affects the deformation characteristics by influencing the vertical stress required to form a sand skeleton, and the skeleton’s stability. When the sand content is less than the critical sand content, bentonite-sand mixtures cannot form a sand skeleton, and particle size has no effect on their characteristics. When the sand content is greater than the critical sand content and the vertical stress exceeds the initial deviation stress, a sand skeleton forms. In this case, smaller the sand particle size, lesser will be the vertical stress required to form a sand skeleton, and more the swelling of bentonite-sand mixtures. Further, more uniform particle size, more stable will be its structure and lesser the compressibility of bentonite-sand mixtures. The hydraulic conductivity is related to the flow area and the seepage path length, and particle size has no obvious effect on either with the same sand content. Therefore, the sand particle size has no obvious effect on mixtures’ permeability.
1 August 2021 in Canadian Geotechnical Journal
Metakaolin has been widely used as pozzolanic additive to improve the pozzolanic activity of lime-based products. In this study, the normal standard Proctor compaction test was performed on metakaolin with (5% lime) and without (0% lime) lime addition. The changes in stiffness, suction, and microstructure with remoulding water content were investigated on statically compacted samples. Results show that lime-treated metakaolin exhibits a 1.5-peak compaction curve, while untreated metakaolin exhibits common one-peak compaction curve. The uncommon shape of the compaction curve of the treated metakaolin can be explained by the non-fully developed soil suction when water is not continuous. Treated and untreated samples compacted at both dry and wet of optimum show uni-modal pore-size distribution characteristics, indicating the absence of aggregates. This is related to the specific thermal treatment, forming separate metakaolin platelets and leading to a modified uniform structure with diffuse platelets. The soil stiffness is rather dominated by the number of particle contacts or soil dry density, the effect of suction being insignificant. For the suction changes, on the dry side, the effect of pore-size distribution prevails facing the effect of water content, while on the wet side it is the effect of water content that becomes dominating.