The combination of safety belts and rollover protective structures (ROPSs) is key in improving the safety of agricultural tractors in the event of rollover. However, we also have the opportunity to enhance the security provided by each ROPS; one such example is the combination of this safety device with adequate mechanical energy absorbers (MEAs). Inexpensive disc-shaped MEAs can be included in the anchoring points of a ROPS onto the chassis of a tractor. Three configurations of ROPS combined with MEAs were tested during the application of loads that simulated the effects of side rollover in the vehicle. The tested configurations included a blank MEA as a reference case alongside a single MEA and a stack assembly containing both elements. The results of the tests show that both the deformation of the ROPS itself and the strain energy are larger in the case of blank MEAs; thus, there is also a risk that the clearance zone will be infringed upon and that the protective structure will collapse. We can conclude that the implementation of an appropriate MEA in ROPS reduces the deformation of the ROPS itself and its strain energy in cases of vehicle rollover; hence, the safety provided by such protection systems may be improved at a low cost.
Disc-shaped mechanical energy absorbers (MEAs), in combination with rollover protection structures (ROPSs), may contribute to the prevention of the infringement of the safety zone and the collapse of the ROPS in case of the overturn of an agricultural tractor. An MEA can absorb a significant amount of potential energy of an overturning tractor and its deformation produces a rotation of the ROPS around the safety zone. In this research, MEAs with two different geometries have been developed. Both geometries present common features, such as disc dimensions, number of rings, and number of arms, but the distribution of the arms differs. Additionally, these MEA were manufactured in steel discs of four different thicknesses, ranging from 2 to 6 mm. The manufactured MEAs were tested in a universal testing machine, and their behavior characterized. From this data, linear models of the MEAs were developed. As a consequence, a number of characteristic parameters were selected and calculated, such as the activation load and the strain energy absorbed in a safe range of applied loads. Some patterns and trends were analyzed from the tested MEAs, which enables a better description of their behavior and the extrapolation of this behavior to other non-tested thicknesses and geometries.
A flexure bearing is a mechanical component designed to enable controlled flexing or deformation, resulting in low-friction movement. It typically consists of thin, flexible materials and is used in precise applications, such as optical systems, robotics, and aerospace, for motion control. Due to their high energy absorption capacity and ease of replacement, flexure bearings are also ideal for use in safety systems, such as seismic events and impact protection. This study investigates the behavior of disc-shaped flexure bearings under plastic deformation. Two specific geometries were modeled and simulated using finite element analysis, fabricated, and subjected to tensile tests, validating the accuracy of the model. Additionally, further geometries were simulated, revealing different energy absorption curve profiles for devices with identical dimensions and similar absorption capacities. This allows for the selection of the most suitable disc based on desired performance characteristics. Graphical Abstract