1 October 1991 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
29 October 2018 in MATEC Web of Conferences
In the modern world of railways, electrification is given great importance. Currently, more than 50% of all freight traffic carried out by electric traction. However, today, about half of the railways are not electrified, so it is necessary to use thermal engines to drive the locomotive. One of the possible variant is use gas turbine unit. The power of the gas turbine unit is given to the electric generator, and the electric motors drive the locomotive. In the present paper, as a power plant of a gas turbine locomotive, considered gas turbine unit with a twin -shaft gas generator of two schemes: 1- with steam supply to the inlet of the high-pressure turbine (into the combustion chamber) and 2- with steam supply to inlet of the free turbine. By CAE system of ASTRA, Collaboration operation lines calculated for different variants of steam injection. When the steam injected into the inlet of a free turbine and a high-pressure turbine. in the case of steam supply to the input of the free turbine and the high-pressure turbine there is a significant shift in Collaboration operation lines, which can lead to a decrease in the gas-dynamical stability of the compressors, and efficiency. To maintain the position of Collaboration operation lines, was applied the correction of the throughput capacity of free turbine nozzle vanes (by 15%). In the case of steam supply to the inlet of a free turbine, to ensure gas-dynamic stability of the compressors, a change in the throughput capacity of its nozzle vanes is required.
11 October 2018 in Russian Aeronautics (Iz VUZ)
This paper describes a method for multicriteria optimization of parameters for both the engine core and engine family with modeling the engine operation as a part of aircraft system.
14 April 2015 in VESTNIK of Samara University. Aerospace and Mechanical Engineering
Аннотация В статье описана концепция разработки виртуальной лаборатории, которая включает в себя подсистему моделирования газотурбинного двигателя (ГТД), подсистему планирования эксперимента, подсистему внесения погрешностей измерений, подсистему идентификации и др. За основу разработки виртуальной лаборатории была принята CAE-система «АСТРА». Описаны особенности разработанной математической модели неустановившихся режимов работы газотурбинных двигателей. Основным отличием математической модели неустановившихся режимов работы ГТД от модели установившихся режимов является то, что не выполняется условие баланса мощности компрессора и турбины. На основе разработанных математических моделей разработана автоматизированная система для виртуальных испытаний газотурбинных двигателей. Разработанная система позволяет решать задачи расчёта эксплуатационных характеристик (дроссельных, скоростных, климатических и высотных), исследовать динамику переходных процессов, выбирать рациональные законы управления двигателем. Автоматизированная система для виртуальных испытаний является наглядной демонстрацией рабочего процесса и закономерностей совместной работы узлов двигателя. Описан интерфейс рабочего окна системы и приведены скриншоты основных элементов интерфейса. Разработанная система позволит сократить трудоёмкость по проведению испытаний двигателей, в процессе обучения существенно расширить количество потенциальных лабораторных работ и повысить качество подготовки специалистов.