Geophysical methodologies represent a paramount approach for assessing the mining potential of a given area. Among these methodologies, the magnetic method stands out as indispensable for the exploration of metalliferous deposits. This method facilitates the characterization of both the lateral extent and vertical depth of anomalous bodies within the surveyed region, as discerned from their influence on the total magnetic field. In the case of the manganese-rich mining zone situated in Bouarfa, particularly in Aïn Beida, the mineral deposit genesis typically involves the association of manganese with ferruginous minerals, significantly perturbing the total magnetic field. However, the initial findings necessitate meticulous corrections to isolate the exclusive impact of anomalous bodies on the magnetic field. Accordingly, correction procedures must address diurnal variations prior to executing a Reduction to the Pole (RTP), enabling the identification of well-defined and unipolar anomalies crucial for precise delineation of potentially mineralized zones. Integration of spatially interpolated data yields comprehensive maps delineating areas of mining significance and elucidating pertinent geological phenomena within the study area. Subsequently, employing 2D modeling techniques on magnetic survey results facilitates accurate estimation of mineralized horizon extents and thicknesses. Ultimately, these synthesized maps serve as valuable guides for subsequent mechanical prospecting endeavors aimed at corroborating findings derived from geophysical methodologies.
During earthquakes, the shear strength and bearing capacity of saturated sandy soils decreases; this is related to an increase in pore pressure. In the ultimate state, the pore pressure becomes equal to the initial effective stress, at which time the material loses all its resistance and liquefaction occurs. Thus, the prediction of the post-liquefaction settlement of the soil is an important step to reduce the seismic risk. Several methods have been developed for the prediction of Seismic-Induced Settlement, the most widely used is that based on the results of in-situ tests SPT, and Several soil reinforcement techniques can be considered, the choice depends mainly on the grain size of the soil to be treated. This article presents a comparative study of the methods for evaluating Seismic-Induced Settlement based on the experimental results of the in situ SPT tests, applied to an earthquake-prone area in northern Morocco which had specific soil formations characterized by the existence of layers of sand over several meters, which suggests the possibility of soil liquefaction and proposes a method of reducing the risk of liquefaction. The analysis of existing SPT data leads to interesting conclusions both in terms of the comparative analysis of methods for the prediction of the post-liquefaction settlement and the understanding of the effect of Soil treatments by Stone Columns to mitigate the risk of liquefaction.
17 January 2023 in International Journal of Innovative Research and Scientific Studies
Several processes allow the improvement of soils such as vibrocompaction, stony columns, static horizontal compaction etc. These processes reduce the risk of liquefaction potential and making it possible to build on this type of soil when the space restriction require it. Stone columns are a recognized method of soil improvement, which consists of creating large diameter columns using special vibrators with granular filling materials introduced into the ground. The objective of this work is to evaluate the effectiveness of stone columns, made in a seismic zone containing liquefiable materials, with regards to the reduction of the risk of liquefaction and the improvement of the bearing capacity of the soil. The approach followed is the exploitation of geotechnical investigation tests (CPT Cone Penetration Test), (SPT: Cone Penetration Test, (pressuremeter tests), carried out before and after soil treatment. This study showed that the network of gravelled columns produces an enhanced soil improvement effect by improving the modulus of elasticity of the soil and reducing settlement and the risk of liquefaction after treatment. The process allows for the improvement of the geotechnical characteristics of its soils, making it possible to build infrastructure and development projects in the area.
1 March 2022 in Civil Engineering and Architecture
The seismic activity in northern Morocco is largely due to an intense tectonic activity Plio-Quaternary and current generated by the approach of the two lithospheric plates Africa-Eurasia. Certainly, the liquefaction of soils is a phenomenon that presents a potential risk and a major challenge for the construction of foundations of engineering structures. The objective of this work is the realization of test plates to decide on adequate treatment in a soil liquefiable. For our case during the construction of a double bridge on a liquefiable soil and in a seismic zone, we were confronted with two technical problems, on the one hand the choice of the method of treatment of the soil in place and on the other hand the verification of this improvement by the results of the CPT tests (Cone Penetration Test) carried out before and after the densification of the soil. Many types of liquefaction remediation methods have been developed. However, for our case, the results indicate the effectiveness of the vibrocompaction method in improving the in-place soil compared to the dry method in eliminating the risk of soil liquefaction. It should be noted that the wet columns were lowered to 22m/TN, and the dry columns were stopped at varying depths between 2 and 14m/TN, and the results of the CPT (Cone Penetration Test) confirm the effectiveness of vibrocompaction and that the bridge foundations are protected against the phenomenon of soil liquefaction.