3 August 2018 in Science Advances
Four-dimensional (4D) printing involves conventional 3D printing followed by a shape-morphing step. It enables more complex shapes to be created than is possible with conventional 3D printing. However, 3D-printed ceramic precursors are usually difficult to be deformed, hindering the development of 4D printing for ceramics. To overcome this limitation, we developed elastomeric poly(dimethylsiloxane) matrix nanocomposites (NCs) that can be printed, deformed, and then transformed into silicon oxycarbide matrix NCs, making the growth of complex ceramic origami and 4D-printed ceramic structures possible. In addition, the printed ceramic precursors are soft and can be stretched beyond three times their initial length. Hierarchical elastomer-derived ceramics (EDCs) could be achieved with programmable architectures spanning three orders of magnitude, from 200 μm to 10 cm. A compressive strength of 547 MPa is achieved on the microlattice at 1.6 g cm−3. This work starts a new chapter of printing high-resolution complex and mechanically robust ceramics, and this origami and 4D printing of ceramics is cost-efficient in terms of time due to geometrical flexibility of precursors. With the versatile shape-morphing capability of elastomers, this work on origami and 4D printing of EDCs could lead to structural applications of autonomous morphing structures, aerospace propulsion components, space exploration, electronic devices, and high-temperature microelectromechanical systems.
1 April 2020 in Journal of the European Ceramic Society
14 January 2020 in Advanced Materials Technologies
1 March 2020 in Journal of Materiomics
22 November 2019 in Advanced Optical Materials
Full‐color reflective filters for large area applications with potentially unprecedented color saturation and excellent mechanical properties deposited by one‐step magnetron sputtering are proposed. Conventional reflective color filters with multiple layers of dielectric films cannot simultaneously produce a large area and good mechanical properties due to the complex multiple depositions and the difference in the thermal expansion coefficients among the material layers. Herein, full‐spectrum colors are generated by novel Mg‐based reflective color filters in a large area of 2 cm × 2 cm with a high hardness of 9.12 GPa, where the filters include an absorber layer with controllable optical constants and a reflective layer with an amorphous structure. The saturation and hue of the produced colors can be controlled by tuning the optical constants and the thickness of the absorber layer. Additionally, the hardness of the Mg‐based reflective color filters is increased by the reflective metallic glass layers because they are derived from the same material as the absorber layer. This paradigm can pave the way for the efficient fabrication of large area color filtering devices for diverse applications, such as surface decorations, optical components, color display devices, structural color printing, and photovoltaic cells with optimum efficiency.
1 July 2021 in NDT & E International