12 May 2023 in Applied Optics
Spatial frequency modulation imaging (SPIFI) is a structured illumination single pixel imaging technique that is most often achieved via a rotating modulation disk. This implementation produces line images with exposure times on the order of tens of milliseconds. Here, we present a new architecture for SPIFI using a polygonal scan mirror with the following advances: (1) reducing SPIFI line image exposure times by 2 orders of magnitude, (2) facet-to-facet measurement and correction for polygonal scan design, and (3) a new anamorphic magnification scheme that improves resolution for long working distance optics.
1 October 2023 in Journal of Biomedical Optics
SignificanceMultiphoton microscopy is a powerful imaging tool for biomedical applications. A variety of techniques and respective benefits exist for multiphoton microscopy, but an enhanced resolution is especially desired. Additionally multiphoton microscopy requires ultrafast pulses for excitation, so optimization of the pulse duration at the sample is critical for strong signals.AimWe aim to perform enhanced resolution imaging that is robust to scattering using a structured illumination technique while also providing a rapid and easily repeatable means to optimize group delay dispersion (GDD) compensation through to the sample.ApproachSpatial frequency modulation imaging (SPIFI) is used in two domains: the spatial domain (SD) and the wavelength domain (WD). The WD-SPIFI system is an in-line tool enabling GDD optimization that considers all material through to the sample. The SD-SPIFI system follows and enables enhanced resolution imaging.ResultsThe WD-SPIFI dispersion optimization performance is confirmed with independent pulse characterization, enabling rapid optimization of pulses for imaging with the SD-SPIFI system. The SD-SPIFI system demonstrates enhanced resolution imaging without the use of photon counting enabled by signal to noise improvements due to the WD-SPIFI system.ConclusionsImplementing SPIFI in-line in two domains enables full-path dispersion compensation optimization through to the sample for enhanced resolution multiphoton microscopy.
15 November 2023 in Applied Optics
Spatial frequency modulation imaging (SPIFI) provides a simple architecture for modulating an extended illumination source that is compatible with single pixel imaging. We demonstrate wavelength domain SPIFI (WD-SPIFI) by encoding time-varying spatial frequencies in the spectral domain that can produce enhanced resolution images, like its spatial domain counterpart, spatial domain (SD) SPIFI. However, contrary to SD-SPIFI, WD-SPIFI enables remote delivery by single mode fiber, which can be attractive for applications where free-space imaging is not practical. Finally, we demonstrate a cascaded system incorporating WD-SPIFI in-line with SD-SPIFI enabling single pixel 2D imaging without any beam or sample scanning.
26 July 2024 in Optics Letters
Spatial frequency modulation imaging (SPIFI) has previously been demonstrated in multiphoton modalities with resolution enhancement. When signal light levels are low enough, signals consist of discrete pulses: this is a photon-counting regime. By binning photon counts into discrete time bins, SPIFI signals can be built up by incrementing the photon counts over many modulation periods. The result is an increase in the signal-to-noise ratio (SNR) over analog SPIFI acquisition, enabling higher fidelity in the greater orders of resolution enhancement that SPIFI can produce.
24 March 2025 in Optics Express
AEAdriana Eres-Castellanos
+2
Laser powder bed fusion (LPBF) is a type of metal additive manufacturing which could benefit from improved process monitoring to improve quality control. We demonstrate, for the first time to our knowledge, the coaxial monitoring of melt track formation in steel powder with spatial frequency modulation imaging (SPIFI), an enhanced-resolution imaging technique which uses a photodiode to record one-dimensional images. Using a custom live-display software and a high-speed SPIFI geometry, we offset the SPIFI field of view from the fusing beam to monitor different regions of the LPBF melt pool and surrounding area. This demonstrates the potential of SPIFI to monitor spatial features within the melt pool in real-time with increased data efficiency.