Multi-walled carbon nanotubes (MWCNTs) were oxidized and characterized by Fourier transform infrared spectroscopy. The adsorption characteristics of the oxidized MWCNT adsorbent were examined using Janus Green (JG) as adsorbate. In batch tests, the effects of pH, adsorbent dose, contact time, and temperature were studied. The maximum adsorption capacity was found to be 56 mg g−1. The experimental data were fitted to the Langmuir, Freundlich, and Tempkin isotherm models, the first one being the most appropriate. Kinetic analysis showed that adsorption was most accurately represented by a pseudo-second-order model.
In the present work, the CeO2/CuFe2O4 nanofibers with the structure of CuFe2O4 as the core and CeO2 nanoparticles as the outer layer were prepared. This novel nanostructure was characterized by X-ray diffraction analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy (SEM). The sizes of CeO2/CuFe2O4 nanofibers determined from the SEM images were 100 nm. The obtained nanocomposite was used to investigate adsorption of Pb(II), Ni(II), and V(V) ions from aqueous solutions. Contact time, pH, initial metal concentration, and temperature were optimized to improve the removal efficiency. The adsorption equilibrium and kinetic data were modeled with classical and recently developed models. Maximum adsorption capacity of Pb(II), Ni(II), and V(V) on CeO2/CuFe2O4 nanofibers were 972.4, 686.1, and 798.6 mg g−1, respectively. The results showed that the synthesized nanocomposite could be considered as an efficient adsorbent in the field of wastewater treatment.
7 June 2015 in Environmental Monitoring and Assessment
We present a way of synthesizing nanocomposite Fe3O4@SiO2@CTAB–SiO2 by employing simple sol–gel technique with selective etching for extreme selectivity adsorption of cyclophosphamide (CP). The transmission electron microscopy (TEM); scanning electron microscopy (SEM); X-ray diffraction (XRD); Fourier transform infrared (FT-IR); vibrating sample magnetometer (VSM); pHPZC; and Brunauer, Emmett and Teller (BET) techniques were used for nanocomposite characterization. These nanoparticles have an SBET of 157.8 m2 g−1 and a high saturation magnetization of 67.5 emu g−1. First, the adsorption system was examined as a function of contact time under various initial CP contents, ionic strength, initial solution pH, adsorbent dose and temperature in batch test. The optimum dose, pH and contact time were obtained to be 0.01 g, 7.0 and 30 min, respectively. Ultimately, experimental isotherm and kinetics data of adsorption of CP onto nanocomposite Fe3O4@SiO2@CTAB–SiO2 were fitted to classical models. Additionally, it was found that the maximum adsorption process capacity of CP on adsorbent was 342.8 mg g−1.