This paper adopts a systems approach to study how millimeter wave (mmWave) radio transmitters on UAVs provide high throughput links under typical hovering conditions. With Terragraph channel sounder units, we experimentally study the impact of signal fluctuations and sub-optimal beam selection on a testbed involving DJI M600 UAVs. From the hovering-related insights and the measured antenna radiation patterns, we develop and validate the first stochastic UAV-to-Ground mmWave channel model with UAVs as transmitters. Our UAV-centric analytical model complements the classical fading with additional losses expected in the mmWave channel during hovering, considering 3-D antenna configuration and beamforming training parameters. We specifically consider lateral displacement, roll, pitch, and yaw, whose magnitude vary depending on the availability of specialized hardware such as real-time kinematic GPS. We then leverage this model to mitigate the hovering impact on the UAV-to-Ground link by selecting a near-to-optimum pair of beams. Importantly, our work does not change the wireless standard nor require any cross-layer information, making it compatible with current mmWave devices. Results demonstrate that our channel model drops estimation error to $\approx$ 0.2 percent, i.e., 18x lower, and improves the average PHY bit-rate by $\approx$ 10 percent when compared to existing state-of-the-art channel models and beamforming methods for UAVs.
14 December 2022 in IEEE/ACM Transactions on Networking
Over-the-air analog computation allows offloading computation to the wireless environment through carefully constructed transmitted signals. In this paper, we design and implement the first-of-its-kind convolution that uses over-the-air computation and demonstrate it for inference tasks in a convolutional neural network (CNN). We engineer the ambient wireless propagation environment through reconfigurable intelligent surfaces (RIS) to design such an architecture, which we call ’AirNN’. AirNN leverages the physics of wave reflection to represent a digital convolution, an essential part of a CNN architecture, in the analog domain. In contrast to classical communication, where the receiver must react to the channel-induced transformation, generally represented as finite impulse response (FIR) filter, AirNN proactively creates the signal reflections to emulate specific FIR filters through RIS. AirNN involves two steps: first, the weights of the neurons in the CNN are drawn from a finite set of channel impulse responses (CIR) that correspond to realizable FIR filters. Second, each CIR is engineered through RIS, and reflected signals combine at the receiver to determine the output of the convolution. This paper presents a proof-of-concept of AirNN by experimentally demonstrating convolutions with over-the-air computation. We then validate the entire resulting CNN model accuracy via simulations for an example task of modulation classification.
13 June 2024 in IEEE Journal on Selected Areas in Communications
We present Eye-Beam, a programmable platform for integrated communication and sensing. Eye-Beam leverages the hardware and processing required for standard millimeter-wave (mmWave) 5G directional communications to enable sensing functions. Specifically, our platform (1) receives and synchronizes to the data frame of broadcast 5G signals, (2) extracts directional communication features, creating a tensor of spatial information, and (3) utilizes this data as input to a DNN that infers the presence of specific objects in the propagation environment. Eye-Beam includes a programmable 28 GHz 64-element phased array, an SDR, and custom FPGA-based firmware. Eye-Beam’s key capabilities and metrics include (i) synchronization of I/Q data (up to 200 MSPS) with beam steering (among 9,601 beams) with 10 ns accuracy; (ii) a signal processing pipeline that extracts communication features such as the SNR and channel response from received 5G waveforms; and (iii) system orchestration that synchronizes the receiver (RX) to the 5G frame structure of the base station (gNodeB) and maintains it within a worst-case OFDM cyclic prefix of $0.29~\mu $ s. Eye-Beam is also able to emulate gNodeB transmissions. We demonstrate Eye-Beam’s performance by showcasing its communication capability (decoding up to 64-QAM), as well as its performance as a channel sounder (extracting detailed directional 5G features in 2,401 beam directions within just 20 ms). We then, for the first time, demonstrate AI-based object classification only using the directional communication features derived by Eye-Beam from ambient mmWave 5G signals transmitted by a gNodeB. Six object classes, including 4 distinct objects concealed in a backpack, are classified with 98% accuracy in an indoor environment.
18 March 2022 in IEEE Transactions on Wireless Communications
We propose a novel distributed beamforming framework for UAVs, called SABRE, wherein airborne transmitters synchronize their operations for data communication with target receivers. SABRE chooses the best-suited subset of transmitters that maximizes user-defined QoS, considering relative distances from receivers, traffic characteristics, cumulative SNR desired at the receiver, and individual SNR estimated for each link. This paper makes three main contributions: (i) It shows how to achieve distributed beamforming in challenging, aerial hovering conditions by accurately synchronizing start-times and eliminating relative clock offsets. (ii) It proposes an algorithm with polynomial complexity that groups transmitters and chooses the receiver, maximizing the number of satisfied receivers in each round. (iii) It experimentally validates the concept of aerial beamforming in a testbed composed of four DJI-M100 UAVs in realistic outdoor environments. We follow this up with at-scale emulation involving beamforming with multiple candidate UAV transmitters in Colosseum, the world’s largest RF emulator. SABRE keeps the overall network frame error rate below 10% with a probability of 0.95 and manifests a 40% improvement in meeting user QoS thresholds over classical resource allocation methods. From a community viewpoint, the beamforming code, UAV interfacing designs, and the Colosseum container will be released publicly, allowing further independent investigations.
Unmanned aerial vehicle (UAV) mounted millimeter wave (mmWave) base stations as well as aerial backhaul links will enable on-demand deployment of network resources. However, prior work has shown aerial links are prone to frequent disruption caused by (i) constant hovering due to GPS inaccuracies that impacts narrow beam-widths, (ii) blockages in the direct line of sight, and (iii) sub-optimal beam selection, especially if reduced angular sectors are searched in a highly dynamic environment. This paper characterizes the impact of each of these phenomena for aerial mmWave links and proposes methods to distinctly identify when they occur in isolation or in combination during deployment. Furthermore, it also proposes corrective actions at the UAV, appropriate for the specific type(s) of impacting events: physical displacement from its earlier location, angular rotation around its vertical axis, or beamwidth adjustment. Our approach relies on exploiting the information contained in the angular domain of a large dataset of experimentally collected beam-selection outcomes, under the above practical scenarios. We incorporate GPS accuracy models and antenna radiation patterns to create a robust model of potential outages. We then propose device-agnostic algorithms that jointly optimize UAVs physical movement and the beamforming procedure. Experimental results obtained by mounting a pair of 60 GHz channel sounders on M600 DJI UAVs, reveal loss reduction of up to 74.7%, translated into 260% physical layer bit-rate improvement compared to the classical 802.11ad standards-defined approach.
This paper proposes and experimentally validates a new paradigm for computing with wireless signals over-the-air (OTA). It demonstrates the first fully connected (FC) neural network (NN) constructed entirely using channel propagation and signal interference principles. Our design is based on architecting the desired linear operation of an FC layer through the superposition of signals emitted from multiple transmitters and received at a single receiver, similar to multiple input single output (MISO) systems. Our design takes into account several practical considerations, such as the impact of multiple subcarriers, the number of transmit antennas, and the changing wireless channel. The key outcome of our work is developing a principled methodology that transforms a given trained digital FC NN into its OTA equivalent. This novel computational paradigm, which we call AirFC, allows us to run NN tasks without compute-specific hardware during tests. We validate our design using 9 time-synchronized software-defined radios (SDRs) available on the ORBIT testbed, emulating a 16 antenna array. We use the MNIST dataset as input to our wireless FC NN and demonstrate classification with 92.61% accuracy, which proves that our NN with OTA FC layers performs similar to the conventional, all-digital version with an accuracy decrease of only 0.73%.