20 January 2014 in Journal of Power Electronics
24 April 2018 in IEEE Transactions on Power Electronics
This paper proposes a new load impedance specification for multi-stage dc power conversion systems. The proposed specification avoids drawbacks of the existing specifications, such as the lack of explicit connections to the dc link dynamics and the unnecessary conservativeness. The new specification offers a direct command/ supervision of the frequency- and time-domain dynamics of the intermediate dc link, while being less conservative than the existing specifications. This paper also presents procedures for redesigning ill-conditioned load impedances to comply with the specification. The validity and utility of the proposed specification are demonstrated using an experimental two-stage dc power conversion system.
20 November 2016 in Journal of Power Electronics
Input Impedances of PWM DC-DC Converters: Unified Analysis and Application Example Current mode control;Dynamic interaction;Input impedances;Middlebrook's extra element theorem;Middlebrook's feedback theorem;Pulse width modulated dc-to-dc converters;Voltage mode control; The input impedances of pulse width modulated (PWM) dc-to-dc converters, which dictate the outcomes of the dynamic interaction between dc-to-dc converters and their source subsystem, are analyzed in a general and unified manner. The input impedances of three basic PWM dc-to-dc converters are derived with both voltage mode control and current mode control. This paper presents the analytical expressions of the 24 input impedances of three basic PWM dc-to-dc converters with the two different control schemes in a factorized time-constant form. It also provides a comprehensive reference for future dynamic interaction analyses requiring knowledge of the converters' input impedances. The theoretical predictions of the paper are all supported by measurements on prototype dc-to-dc converters. The use of the presented results is demonstrated via a practical application example, which analyzes the small-signal dynamics of an input-filter coupled current-mode controlled buck converter. This elucidates the theoretical background for the previously-reported eccentric behavior of the converter.
23 May 2017 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper investigates the impacts of the load subsystem on stability and performance of the upstream converter in multistage Dc-to-Dc power conversion systems. This paper demonstrates that an appropriate load subsystem can be constructed to provide both stability and intended performance for the upstream converter at the brink of instability before being coupled with the load subsystem. These stabilizing effects of the load subsystem are theoretically analyzed and experimentally validated using a two-stage power conversion system, consisting of an upstream boost converter, downstream buck converter, and two filter stages. This paper also presents the design procedures for the stabilizing load subsystem, along with the performance verification of the upstream boost converter and the downstream buck converter.