Iman Rashidi

Iman Rashidi

Auto-generated profile, based on publicly available information

Iman Rashidi

Quchan University of Technology

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2014 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
IRIman Rashidi
Iman Rashidi
Omid MahianOmid Mahian
Omid Mahian
GLGiulio Lorenzini
Giulio Lorenzini
Cesare BiserniCesare Biserni
Cesare Biserni
SWSomchai Wongwises
Somchai Wongwises


1 January 2021 in Journal of Taibah University for Science
Verified
Journal Article
Open access
MRMohammad Mehdi Rashidi
Mohammad Mehdi Rashidi
MAMojeed Akolade
Mojeed Akolade
Mohamed M. AwadMohamed M. Awad
Mohamed M. Awad
AAA. O. Ajibade
A. O. Ajibade
IRI. Rashidi
I. Rashidi
This flow investigation analysed the entropy generation rate as an additional enrichment to the rate of heat transfer in Casson nanofluid flow between squeezing disks. The flow is modelled mathematically in PDEs systems, transformed into systems of ODEs via a well-posed transformation, and then solved. In a limiting case, good agreement of the numerical results is achieved. The assumption of variable fluid properties was seen to downsize the fluid velocity and temperature fields but enriches the nanoparticle volume fraction. Entropy number remarkably minimized for thermophysical properties, yield stress, and squeezing impact, while nanoparticle parameters, thermal diffusivity, and viscous dissipation contributed significantly to the system disorderliness. Moreover, findings reveal that thermal irreversibility controls the flow system in the entire channel (approximately 0.3<η≤1) except near the fixed disk where the other irreversibility dominated. Prandtl, Eckert, and Darcy's number help facilitate the irreversibility distribution phenomenon. With nanoscale mechanism modification nanoparticle volume fraction and energy distributions can easily be achieved.

15 August 2019 in International Journal of Numerical Methods for Heat & Fluid Flow
Verified
Journal Article
Closed access
IRIman Rashidi
Iman Rashidi
Lioua KolsiLioua Kolsi
Lioua Kolsi
Goodarz AhmadiGoodarz Ahmadi
Goodarz Ahmadi
Omid MahianOmid Mahian
Omid Mahian
Somchai WongwisesSomchai Wongwises
Somchai Wongwises
EAE. Abu-Nada
E. Abu-Nada
Purpose: This study aims to investigate a three-dimensional computational modelling of free convection of Al2O3 water-based nanofluid in a cylindrical cavity under heterogeneous heat fluxes that can be used as a thermal storage tank. Design/methodology/approach: Effects of different heat flux boundary conditions on heat transfer and entropy generation were examined and the optimal configuration was identified. The simulation results for nanoparticle (NP) volume fractions up to 4 per cent, and Rayleigh numbers of 104, 105 and 106 were presented. Findings: The results showed that for low Ra (104) the heat transfer and entropy generation patterns were symmetric, whereas with increasing the Rayleigh number these patterns became asymmetric and more complex. Therefore, despite the symmetric boundary conditions imposed on the periphery of the enclosure (uniform in Ɵ), it was necessary to simulate the problem as three-dimensional instead of two-dimensional. The simulation results showed that by selecting the optimal values of heat flux distribution and NP volume fraction for these systems the energy consumption can be reduced, and consequently, the energy efficiency can be ameliorated. Originality/value: The results of the present study can be used for the design of energy devices such as thermal storage tanks, as both first and second laws of thermodynamics have been considered. Using the optimal design will reduce energy consumption.

21 December 2012 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
IRI. Rashidi
I. Rashidi
MPMo. Passandideh-Fard
Mo. Passandideh-Fard
In this paper, the partially cavitating flow over an axisymmetric projectile is studied in order to obtain the optimum cavitator such that, at a given cavitation number, the total drag coefficient of the projectile is minimum. For this purpose, the boundary element method and numerical simulations are used. A large number of cavitator profiles are produced using a parabolic expression with three geometric parameters. The potential flow around these cavitators is then solved using the boundary element method. In order to examine the optimization results, several cavitators with a total drag coefficient close to that of the optimum cavitators are also numerically simulated. Eventually, the optimum cavitator is selected using both the boundary element method and numerical simulations. The effects of the body radius and the length of the conical section of the projectile on the shape of the optimized cavitator are also investigated. The results show that for all cavitation numbers, the cavitator that creates a cavity covering the entire conical section of the projectile with a minimum total drag coefficient is optimal. It can be seen that increasing the cavitation number causes the optimum cavitator to approach the disk cavitator. The results also show that at a fixed cavitation number, the increase in both the radius and length of the conical section causes the cavitator shape to approach that of the disk cavitator.

20 September 2016 in Journal of Thermal Science and Engineering Applications
Verified
Journal Article
Closed access
PDF file
HZHossein Zamani
Hossein Zamani
OMOmid Mahian
Omid Mahian
IRIman Rashidi
Iman Rashidi
GLGiulio Lorenzini
Giulio Lorenzini
SWSomchai Wongwises
Somchai Wongwises
The purpose of this study was to optimize the performance of a double-exposure solar cooker based on exergy efficiency. Two similar solar cookers with variable parabolic mirror position were used for this experimental research. The system's exergy depends on many variables, which were kept fixed with the exception of the mirror position and operation time. The mathematical model of exergy efficiency was obtained based on the experimental variables, which could be used to optimize the mirror positions at any time. As a result, a new system with a variable mirror on a parabolic curve was developed, which can yield up to 30% increased mean exergy efficiency. Validation of the results was carried out by both the variance analysis test and comparing with the experimental data. The experiments were carried out in Mashhad, Iran, at 37 latitude, 54 longitude, and a height of 985 m above sea level.