1 January 2007 in Optics Express
In this work we present both experimental and theoretical thermal analysis of an electrically pumped hybrid silicon evanescent laser. Measurements of an 850 μm long Fabry-Perot structure show an overall characteristic temperature of 51 °C, an above threshold characteristic temperature of 100 °C, and a thermal impedance of 41.8 °C/W. Finite element analysis of the laser structure predicts a thermal impedance of 43.5 °C/W, which is within 5% of the experimental results. Using the overall characteristic temperature, above threshold characteristic temperature, and the measured thermal impedance, the continuous wave output power vs. current from the laser is simulated and is in good agreement with experiment.
1 March 2007 in IEEE Photonics Technology Letters
Waveguide uni-traveling-carrier photodiodes (UTC-PDs) have been fabricated and tested. Output saturation currents greater than 40 mA at 1 GHz are demonstrated for a 10 mumtimes150mum photodiode (PD). The third-order intermodulation distortion is also measured and exhibits a third-order output intercept point of 43 dBm at 20 mA and 34 dBm at 40 mA for this same PD. UTC-PDs with geometries of 5 mumtimes100 mum and 10 mumtimes100 mum are also compared and it is shown that a wider waveguide PD has improved saturation characteristics due to the lower optical power density which reduces the saturation at the front end of the device
4 August 2008 in Optics Express
We present an integration platform based on quantum well intermixing for multi-section hybrid silicon lasers and electroabsorption modulators. As a demonstration of the technology, we have fabricated discrete sampled grating DBR lasers and sampled grating DBR lasers integrated with InGaAsP/InP electroabsorption modulators. The integrated sampled grating DBR laser-modulators use the as-grown III–V bandgap for optical gain, a 50 nm blue shifted bandgap for the electrabosprtion modulators, and an 80 nm blue shifted bandgap for low loss mirrors. Laser continuous wave operation up to 45 °C is achieved with output power >1.0 mW and threshold current of 2GHz with 5 dB DC extinction.
1 March 2007 in IEEE Photonics Technology Letters
A novel two-tone measurement technique for characterizing distortion in optical phase modulators is proposed and demonstrated. The technique is used to characterize an InGaAsP-InP modulator in a monolithically integrated receiver. Results for forward and reverse bias conditions in the modulator show a phase IP3 of 7.2pi and 0.97pi rad, respectively