Seung Sik Ham

Seung Sik Ham

Auto-generated profile, based on publicly available information

Seung Sik Ham

Advanced Photovoltaics Research Center, Korea Institute of Science and Technology, Seoul 02792, Republic of Korea

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2023 in ACS Applied Energy Materials
Verified
Journal Article
Closed access
SJSeonghoon Jeong
Seonghoon Jeong
SHSeung Sik Ham
Seung Sik Ham
ECEun Pyung Choi
Eun Pyung Choi
DHDavid J. Hwang
David J. Hwang
HYHyeonggeun Yu
Hyeonggeun Yu
JJJeung-Hyun Jeong
Jeung-Hyun Jeong

4 September 2020 in Polymers
Verified
Journal Article
Open access
PDF file
SHSeung Sik Ham
Seung Sik Ham
HLHo LEE
Ho LEE
We experimented with two polymer materials with different ultraviolet (UV) wavelength absorption characteristics, which are commonly used in flexible devices, by applying an ultrashort-pulsed laser of a 355-nm UV wavelength for 10 ps. The laser parameters studied were pulse repetition rate, laser irradiation method, and laser power condition. Previous studies using polyethylene terephthalate (PET), which does not exhibit linear absorption at a UV wavelength, have focused on processing trends resulting in minimal collateral damage around the laser-induced ablation. However, our results showed a trend of accumulating such damage irrespective of the laser parameters. Meanwhile, polyimide (PI) exhibited a completely different behavior depending on the laser parameters. At low pulse repetition rates, minimal collateral damage was observed, whereas at high repetition rates, the morphology varied considerably. The electrical characteristics of the laser-processed materials were found to be correlated with the variations in morphology. In the case of PI, such variations in electrical resistance and morphology indicated that the material was carbonized. The findings of this study are expected to provide a useful reference when selecting parameters for the laser processing of similar polymer materials.

20 April 2020 in Polymers
Verified
Journal Article
Open access
PDF file
SHSeung Sik Ham
Seung Sik Ham
HLHo LEE
Ho LEE
In processes using the ultrashort pulsed laser, the phenomenon that the ablation efficiency is reduced due to the increase of the shielding effect of the generated plume is increasingly caused by the use of the high power and high repetition rate. A new method is needed to prevent a decrease in ablation efficiency in processing using an ultrashort pulsed laser. In this study, the proposed a processing method that can improve the ablation efficiency by providing an efficient escape path of plume, and examine the feasibility of a new processing method. The new method we proposed is a method of laser processing after generating a fine curvature in the polymer as a preliminary preparation. The fine curvature of the polymer produced by the preliminary preparation induces an artificial chimney-like opening along the path of the incident beam during laser processing, thereby enabling the plume to be effectively removed. The experiment for examine the feasibility through a new method was conducted using a 10-picosecond laser of UV wavelength with two optical systems. As a new processing method, when processing with ultrashort pulse laser, it was observed that the ablation efficiency improved.