30 April 2024 in Journal of Welding and Joining
Electron beam welding was conducted on SA508 Gr.3 Cl.1 steel, which is being considered as a material used in the pressure vessel steel of small modular reactors. The characteristics of the welds were analyzed under various heat treatment conditions. The heat treatment conditions were categorized as as-welded, post weld heat treatment(PWHT), quality heat treatment(QHT), and their features were examined and compared through cross-sectional structure and composition analyses, as well as mechanical property tests. The electron beam welded joints displayed no defects, including pores or cracks. weld metal of the as-welded specimen revealed a needle-type martensite with high hardness, whereas the base metal was characterized by tempered bainite. The weld cross-section bead of the QHT specimen exhibited no significant difference in microstructure compared to the base metal. Tensile testing revealed that both the as-welded and PWHT specimens fractured at the base metal, whereas the QHT specimen fractured at the weld metal. The PWHT specimens showed enhanced impact values in the welds compared to the as-welded specimens. In the QHT specimens, both the base metal and the weld metal demonstrated similarly favorable impact values, approximately 200 Joules. It is evident that post-welding heat treatment improves the toughness value, and quality heat treatment can result in the weld metal being similar to the base metal.
31 December 2023 in Journal of Welding and Joining
Environmental protection policies have led to a focus on clean energy from Liquefied Natural Gas (LNG) and thus, its demand is increasing. Several studies for the development of cryogenic materials and fabrication technologies for storage and delivery of LNG are presented worldwide. Recently, International Maritime Organization (IMO) acknowledged that high-manganese steel was one such cryogenic material for application in LNG storage. Thus, high-manganese steel is expected to be increasingly used in the cryogenic storage industry because of its excellent material properties such as low-temperature toughness and tensile strength. A variety of researches on the welding technologies are available, including arc welding, laser welding and hybrid laser-arc welding. However, electron beam welding (EBW) has not been widely studied. In this work, EBW was investigated for the thick high-manganese steel plate and its mechanical properties were evaluated and compared with the characteristics of hybrid laser-arc welding. Our study indicates that EBW exhibits better mechanical properties than the hybrid laser-arc welding and it can be an effective potential candidate technology for welding of thick high-manganese steel plate with application in cryogenic storage tank.
31 December 2023 in Journal of Welding and Joining
* Welding research council
31 December 2023 in Journal of Welding and Joining
The overall technology required for the application of electron beam welding to ultra-thick plate pressure vessel in small modular reactors was considered. Electron beam welding has the advantage of reducing the manufacturing time compared with traditional arc welding, but it requires the construction of complex equipment and the establishment of related process technology. Based on the thickness of 150~250 mm, the electron beam welding equipment for application to SMR pressure vessel requires large-capacity equipment of 120~170 kV, 150 kW or more, which has never been commercially manufactured so far. A stable beam must be maintained for a constant time. Anti-arcing and seam tracking functions are also required. Electron beam welding of low-alloy steel has superior characteristics in terms of strength and toughness compared with arc welding. The welded area can be made into a base material by solution heat treatment. Cleaning and gap control are important for weld quality. Weld area should not be affected by magnetic fields. As circumferential welding overlaps in span at the welding start and end, it requires precise setting of welding parameters. For welding of large pressure vessel, customized cylindrical vacuum chamber or local vacuum chamber are suitable. It must be shielded from X-rays generated during welding.
31 December 2023 in Journal of Welding and Joining
The development of small modular reactors (SMRs) has attracted significant attention owing to the increasing interest in energy security and carbon neutrality worldwide. An SMR is an advanced nuclear reactor with a power capacity of up to 300 MWe per unit. To fabricate the SMR, innovative manufacturing technologies such as powder metallurgy hot isostatic pressing (PM-HIP), electron beam welding (EBW), and diode laser cladding (DLC) were introduced to reduce the fabrication cost and time. Particularly, this replaced arc-based welding and cladding with high-energy beam-based EBW and DLC. The EBW could provide one pass welding for extremely thick specimens. In addition, in the case of using the DLC, only one layer cladding was acceptable for corrosion protection owing to its low dilution rate. However, studies on the innovative manufacturing technologies were less reported because of technology security. In this study, recently reported research articles regarding the EBW and DLC were reviewed. In particular, local vacuum and reduced pressure electron beam studies were discussed by comparing their the arc welding results. Process parameter studies on the DLC were also reviewed to introduce appropriate optimized conditions for the industry application.
31 October 2024 in Journal of Welding and Joining
Electron beam welding (EBW) has been attracted due to its high energy density, high depth-to-width ratio, low thermal strain, compared with arc and laser welding. In addition, it ensures high quality weld joint in structural metals in a wide range of thickness from 0.025 mm to 300 mm. Therefore, EBW is widely used in industries such as automotive, aviation, nuclear power plant, etc. Although a lot of studies on EBW for several decades have been presented, EB based repair welding with supplement of filler metal has less reported. In this work, EB repair welding for 5083 aluminum alloys was investigated because the aluminum alloys are becoming more important as a lightweight material in mobility industries. Material characterization and mechanical properties of the repair-welded specimens were evaluated, compared with characteristics of base metal and bead welding without repair. The optimized experimental conditions showed tensile strength of 294 MPa, which is a similar to base metal. Our study indicates that EB repair welding can be considered for the candidate of repair welding of aluminum alloys.