1 October 2020 in Polymer Degradation and Stability
1 April 2013 in Journal of Materials in Civil Engineering
This paper reports a laboratory investigation aimed at evaluating the potential of polymer binders to stabilize pavement subgrades in Qatar. The conclusions regarding the impact of the polymer stabilizers are based on comparisons with selected physical, chemical, mechanical, and microstructural properties of natural Qatari subgrade soil and soils stabilized with the traditional standard, portland cement (PC). The results demonstrate that the polymer binders modify the Qatari subgrade soils resulting in more favorable engineering properties: for example, the compressive strengths of the polymer-stabilized soils are superior to those of the unstabilized soils and those stabilized using PC. The mechanical properties of the stabilized and unstabilized soils were incorporated in the analysis of asphalt pavement sections using the state-of-the-art protocol for pavement design and analysis. Results of the analysis further demonstrated the benefits of using stabilized subgrade soils in improving pavement ...
1 June 2016 in Acta Materialia
25 April 2016 in International Journal of Pavement Engineering
This study evaluates the potential of selected ionic polymers to act as pavement subgrade binders. Investigations were based on their relative performance with a Qatari soil which was selected as typical of a pavement subgrade to be found in the Middle East and North African region. The polymeric binders chosen were three synthetic ionic variations of polyacrylamide: cationic poly(acrylamidopropyl trimethyl ammonium chloride) (designated PAMTAC), anionic hydrolysed poly(acrylamide) (HPAM) and the ampholitic terpolymer poly(acrylamide-co-sodiumacrylate-co-(3-acrylamidopropyl) trimethylammonium chloride) (TPAM). The polymers were characterised by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic spectroscopy (1H-NMR and 13C-NMR). The comparative performance of the polymer-treated soil was judged on the basis of results obtained from selected standard mechanical test data: specifically, the unconfined compressed strength, the stiffness modulus and the toughness. It is concluded that a 50% w/w aqueous solution of the ampholitic terpolymer applied at a dosage of 2.0% by dry weight of the soil gives the best subgrade stabilisation. Of some significance, it is further noted that this ampholitic polymer was superior as a binding agent to the traditional standard, Portland cement, judged under equivalent but nonstandard conditions. Modifying the polymer to act as a binder for subgrade soils in general is also discussed.
1 November 2020 in International Journal of Solids and Structures
29 May 2013 in Journal of Materials Engineering and Performance