Ground water samples from residential homes in three Regions of Ghana: Central, Greater Accra and Ashanti, were analyzed for iron and manganese contamination. The samples were exposed to characterized zeolite Y by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transformed-infrared spectroscopy and thermos gravimetric-differential thermal analysis. Zeolite Y is able to remove 98% of iron and 97% of manganese within an hour. The adsorption of both iron and manganese followed the Freundlich model, suggesting that the ions were transported onto the zeolite Y surface and subsequently diffused into the zeolite Y framework. The kinetic studies showed that pseudo-first order and intra particle and film diffusion models provided the best fit. The adsorption at 0.2 mg L−1 Fe ( ) is calculated to be 0.023 mg g−1 for the Freundlich adsorption model, whilst that of manganese at 0.05 mg L−1 Mn ( ) is evaluated to be 0.015 mg g−1. The zeolite retains its adsorption properties when retrieved from the first exposure water sample, washed copiously with distilled water and added to fresh water samples. The results suggest that zeolite Y can be used as a potential adsorbent for the removal of iron and manganese from groundwater.
Zeolite X was synthesized in the laboratory and was characterized using X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, energy dispersive X-ray spectrometer, and Fourier transformed infrared spectrometry. Desalination activity of zeolite X was investigated by the ion-exchange process. The pH of the seawater prior to desalination analysis was 7.87 ± 0.03 through the period of the investigation. The conductivity of the seawater was found to be 16.2 ± 0.01 mS/cm. Effect of time on ion removal was measured. Removal efficiencies of ions showed a trend of Ca2+ > K+ > Mg2+ > Na+. Equilibrium data were fitted by Langmuir and Freundlich isotherms and parameters were evaluated using these models. Adsorption capacities obtained followed the order Ca2+ > K+ > Mg2+ > Na+ with R2 values K+ > Na+ > Ca2+ > Mg2+ for both Langmuir and Freundlich parameters. Equilibrium kinetic data were analyzed using adsorption kinetic models: pseudo-first-order and pseudo-second-order kinetic models. A linear regression method was used to estimate the adsorption and kinetic parameters. The R2 values obtained followed the order K+ > Mg2+ > Ca2+ > Na+ for both pseudo-first- and pseudo-second-order kinetic models. Zeolite X has attractive features as an adsorbent for desalination of seawater.
INTRODUCTION: cervical cancer is a major cause of death amongst women around the world. In Ghana, it accounts for over 2,119 female deaths and about 3,151 new diagnoses of the disease and usually diagnosed at an advance stage, making it difficult to treat. This study aims at assessing the knowledge on risk factors, prevention and treatment of cervical cancer among women in Bosore. METHODS: this study was a cross-sectional descriptive study conducted among women in Bosore a town in the Kwabre East District in the Ashanti Region of Ghana. A total of 200 women were selected for the studies using the convenience sampling technique. Structured questionnaires were used to collect data and statistical package for social sciences application was used to analyse the data. Pearson chi-square test was used to find associations between knowledge and awareness level and socio-demographic characteristics of the participants. RESULTS: generally, 9.7% of the respondents had high knowledge on cervical cancer, 20.6% had moderate knowledge and 69.7% had low knowledge on cervical cancer. There was a significant association between educational background (p=0.000) and awareness level of the respondents. There was also a significant association between the occupation (p=0.003), educational background (p=0.000) and knowledge level of the respondents. CONCLUSION: the knowledge level of the respondents was very low. Specifically, the respondents had inadequate knowledge on risk factors, signs and symptoms, prevention and treatment of cervical cancer. The study revealed that there should be introduction and intense education on cervical cancer education at antenatal and family planning clinics in the community and Ghana as whole.
Ammonium ion adsorption by laboratory-synthesized zeolite (linde type A; LTA) was investigated in batch kinetics experiments. Synthesized zeolite LTA was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy and particle size analysis. Water samples were taken from the Nyam and Tano rivers in Ghana, and 0.8 g of zeolite was added to 100 ml portions of each sample. Portions of the samples were withdrawn every 30 min for 150 min and the concentration of ammonia in each sample was determined. The removal efficiency of zeolite LTA was evaluated by retrieving the zeolite from the water samples and adding to a fresh sample to repeat the process. Equilibrium data were fitted by Langmuir and Freundlich isotherms. Maximum adsorption capacities were 72.99 mg g(-1) for samples from the River Nyam and 72.87 mg g(-1) for samples from the River Tano. The equilibrium kinetic data were analysed using adsorption kinetic models: pseudo-first order and pseudo-second order kinetic models. Linear regression was used to estimate the adsorption and kinetic parameters. The results showed that the adsorption followed pseudo-second order kinetics and suggest that zeolite LTA is a good adsorbent for the removal of nitrogen ammonia from water.
30 September 2020 in Science Journal of University of Zakho
Pyrite phase FeS2 thin films have been grown by a two-stage process of chemical bath deposition followed by sulfurization. Thiourea and thioacetamide were used as sulfur precursors in separate baths. The deposition time was controlled for 1, 2, and 3 hours respectively. The as-deposited films were sulfurized at temperatures of 250 oC and 500 oC to form the pyrite phase. The effect of deposition time and sulfurization temperature on the structure, morphology and optical properties of the iron pyrite films obtained from the two separate baths were studied and compared. X-ray diffraction analyses established the formation of the pyrite phase in all the films after sulfurization, in addition to iron (II) oxide hydrate as impurities. All films showed further improvement in pyrite formation, crystallinity as well as an increase in crystallite size after sulfurizing at 500 oC. EDAX and SEM microscopy showed that the iron pyrite films produced from the bath containing thiourea, had better crystallinity and a higher iron content. The optical band gap of the iron pyrite films obtained with thiourea, was 2.1, 1.9 and 1.6 eV for the various deposition times. With thioacetamide, the band gap was 1.4 eV, for the deposition time of 3 hours.