Natural hazards engineering plays an important role in minimizing the effects of natural hazards on society through the design of resilient and sustainable infrastructure. The DesignSafe cyberinfrastructure has been developed to enable and facilitate transformative research in natural hazards engineering, which necessarily spans across multiple disciplines and can take advantage of advancements in computation, experimentation, and data analysis. DesignSafe allows researchers to more effectively share and find data using cloud services, perform numerical simulations using high performance computing, and integrate diverse datasets so that researchers can make discoveries that were previously unattainable. This paper describes the design principles used in the cyberinfrastructure development process, introduces the main components of the DesignSafe cyberinfrastructure, and illustrates the use of the DesignSafe cyberinfrastructure in research in natural hazards engineering through various examples.
1 November 2005 in Journal of Geotechnical and Geoenvironmental Engineering
Eight dynamic model tests were performed on a 9 m radius centrifuge to study the behavior of single piles and pile groups in liquefiable and laterally spreading ground. Pile diameters ranged from 0.36 to 1.45 m for single piles, and from 0.73 to 1.17 m for pile groups. The soil profile consisted of a gently sloping nonliquefied crust over liquefiable loose sand over dense sand. Each model was tested with a series of realistic earthquake motions with peak base accelerations ranging from 0.13 g to 1.00 g . Representative data that characterize the important aspects of soil–pile interaction in liquefiable ground are presented. Dynamic soil–pile and soil–pile cap forces are backcalculated. Directions of lateral loading from the different soil layers are shown to depend on the mode of pile deflection relative to the soil, which depends on the deformed shape of the soil profile, the pile foundation stiffness, and the magnitude of loads imposed by the nonliquefied crust. Procedures for estimating the total horiz...
1 September 2007 in Journal of Geotechnical and Geoenvironmental Engineering
Monotonic, static beam on nonlinear Winkler foundation (BNWF) methods are used to analyze a suite of dynamic centrifuge model tests involving pile group foundations embedded in a mildly sloping soil profile that develops liquefaction-induced lateral spreading during earthquake shaking. A single set of recommended design guidelines was used for a baseline set of analyses. When lateral spreading demands were modeled by imposing free-field soil displacements to the free ends of the soil springs (BNWF_SD), bending moments were predicted within −8% to +69 (16th to 84th percentile values) and pile cap displacements were predicted within −6 to +38% , with the accuracy being similar for small, medium, and large motions. When lateral spreading demands were modeled by imposing limit pressures directly to the pile nodes (BNWF_LP), bending moments and cap displacements were greatly overpredicted for small and medium motions where the lateral spreading displacements were not large enough to mobilize limit pressures, a...
1 October 2010 in Soil Dynamics and Earthquake Engineering