4 September 2018 in IEEE Transactions on Industrial Informatics
This paper proposes a high efficient approach for power disturbance waveform (PDW) compression in the view of Heisenberg uncertainty. The key idea is trying to represent each signal component of PDW by nonzero coeffients as few as possible with the uncertainty principle restriction. PDWs are projected in a union of bases (UB), and each signal component of the PDWs can be represented very sparsely. The UB decomposition is solved by orthogonal matching pursuit (OMP). The features and cross correlation of subbases of the UB guarantee the PDW compression with high compression ratio and recovered accuracy. With various simulated and field PDWs tests, the compressed data size of the new method is proved with good characteristics such as low sensitivity to sampling frequency increment and to types of signal components contained in PDWs. Besides, it is found that the new method and methods which employ wavelet techniques share similar effect of noise for PDW compression. The proposed method is also applied in a 220kV power substation for field PDWs compression from fault recorders. The comparisons, analyses and experiments indicate that the proposed method has a high PDWs compression efficiency for future power grid monitoring.
19 January 2016 in Journal of Modern Power Systems and Clean Energy
The signal spectral leakage and fence effect are prone to take place during the power harmonic analysis by fast fourier transform (FFT) under asynchronous sampling. The inhibiting ability of classical window functions is restricted by side-lobe behaviors. A new type window function called time domain mutual-multiplication window, is obtained by multiplication operation of several window functions. A novel approach of harmonic analysis is developed through analyzing performances of main-lobe and side-lobe of the new window. Simulation results show that the time domain mutual-multiplication window can significantly suppress frequency spectral leakage and improve the accuracy of harmonic parameter estimation.
17 December 2018 in The Journal of Engineering
Single‐phase FACTS device has a bulky and short‐life electrolytic capacitor to absorb the ripple pulsating at twice of the line frequency in DC side, resulting in lower power density. This paper introduced a structure of three‐phase bridge which added an additional leg connected to an AC capacitor based on single‐phase H‐bridge. The 2‐ripple energy of the electrolytic capacitor in single‐phase H‐bridge could be transformed to the film capacitor of the AC side in three‐phase H bridge. The size of single‐phase FACTS is reduced by ten times compared to the single‐phase H‐bridge. A simple control strategy had been studied, through two kinds of controllers: the digital quais‐PR controller had been used to control gird current and AC capacitor voltage and current; the two cosine controller had been used to eliminate the rest of two‐ripple harmonic in the DC side, there was no controller to maintain DC voltage. The experiments verified the feasibility of the control strategy.