Understanding the physical processes involved in snow avalanche‐obstacle interaction is essential to be able to estimate the pressure exerted on structures. Although avalanche impact pressure has been measured in field experiments for decades, the underlying physical principles are still elusive. Previous studies suggest that pressure is increased due to the formation of an influenced flow region around the structure, the mobilized domain, which varies in size depending on snow properties such as snow cohesion. Here, we aim to better understand how cohesion, friction, velocity, and their interplay affect avalanche pressure buildup on structures. This is achieved by simulating the avalanche‐obstacle interaction with a newly developed numerical model based on the discrete element method, using a cohesive bond contact law. The relevance of the model is tested by comparing simulated impact pressures with field measurements from the Vallée de la Sionne experimental site. Our results show that at the macroscale, impact pressure consists of the inertial, frictional, and cohesive contributions. The inertial and frictional contributions arise due to the existence, shape, and dimension of the mobilized domain. The cohesive contribution increases the particle contact forces inside the domain, leading up to a doubling of the pressure. Based on these physical processes, we propose a novel scaling law to reduce the problem of calculating the pressure induced by cohesive flows, to the calculation of cohesionless flows. These findings enhance our understanding of the interaction of cohesive granular flows, such as snow avalanches, and structures at the microscale and macroscale.
Avalanche modeling is an essential tool to assess snow avalanche hazard. Today, most popular numerical approaches adopt depth-averaged equations. These methods are computationally efficient but limited in capturing processes occurring in the flow depth direction, e.g. erosion or deposition, which are often considered using ad hoc parameterizations or neglected completely. However, processes such as snow erosion, can crucially influence flow dynamics and run-out and are often not negligible. We address these issues by using a new three-dimensional (3-D) model, based on the material point method and finite strain elastoplasticity. To assess the possibilities and challenges associated with these highly detailed but computationally expensive calculations, we simulated the ‘Salezer’ snow avalanche that released in Davos, Switzerland in 2019. To reproduce the event in our simulations, we use the release areas mapped in a photogrammetric drone survey and estimate the snow conditions on the day of the event. We compare macroscopic features, such as flow outline and snow deposition of the simulated avalanche to field observations. An in-depth analysis of transient 3-D flow structures at the avalanche head not only demonstrates the degree of physical detail in the model, but also highlights challenges which still need to be addressed.
The calculation of the impact pressure on obstacles in granular flows is a fundamental issue of practical relevance, e.g. for snow avalanches impacting obstacles. Previous research shows that the load on the obstacle builds up, due to the formation of force chains originating from the obstacle and extending into the granular material. This leads to the formation of a mobilized domain, wherein the flow is influenced by the presence of the obstacle. To identify the link between the physical mobilized domain properties and the pressure exerted on obstacles, we simulate subcritical cohesionless and cohesive avalanches of soft particles past obstacles with circular, rectangular or triangular cross-section using the Discrete Element Method. Our results show that the impact pressure decreases non-linearly with increasing obstacle width, regardless of the obstacle’s cross-section. While the mobilized domain size is proportional to the obstacle width, the pressure decrease with increasing width originates from the jammed material inside the mobilized domain. We provide evidence that the compression inside the mobilized domain governs the pressure build-up for cohesionless subcritical granular flows. In the cohesive case, the stress transmission in the compressed mobilized domain is further enhanced, causing a pressure increase compared with the cohesionless case. Considering a kinetic and a gravitational contribution, we are able to calculate the impact pressure based on the properties of the mobilized domain. The equations used for the pressure calculation in this article may be useful in future predictive pressure calculations based on mobilized domain properties. Graphic
Powder snow avalanches (PSAs) radiate infrasound energy, yet the source mechanism remains unclear, limiting hazard monitoring and mitigation with infrasound‐based technologies. Here, we analyze a unique data set from a large PSA to improve the understanding of the source mechanism. Through comparison of cluster activity within the airborne layers of the PSA and the recorded infrasound signal in the frequency domain, we demonstrate that infrasound is mainly generated from particle clusters suspended by turbulent eddies or ejected from the denser basal layer. Further correlating infrasound amplitudes with radar‐derived spatial distributions of these clusters, we reveal a distributed source extending hundreds of meters behind the avalanche front. Additionally, we establish a relationship between infrasound and kinetic energy of suspended particles. These findings deepen our understanding of the complex dynamics of infrasound generation, offering valuable insights for avalanche detection and early warning strategies, and fundamental comprehension of PSA dynamics.
Measurements of snow avalanche impact pressures are performed at the Vallée de la Sionne test site since winter 1999. In these years of operation, we recorded the impact pressure of around 60 avalanches characterized by different flow regimes and dimensions.Pressure measurements were performed, simultaneously, on three different structures which are spatially distributed with a maximum distance of 30 m, in the run-out zone of the Vallée de la Sionne test site. The structure widths range from 0.25 to 1 m. On these structures pressure sensors ranging from small cells with 0.10 to 0.25 m in diameter to large pressure plates with area of 1m2 are mounted at different heights.A systematic analysis of all 60 avalanche data sets shows that the pressure measured at the different obstacles varies considerably, even within the same avalanche, both in space and time. Part of these differences can be attributed to different drag coefficients and dependence on obstacle size, but a large part of these differences can only be explained by the spatial variability of the flow properties and the temporal variability of the physical processes governing the interaction of the avalanche and the structures.In this contribution we show how spatial and temporal impact pressure variabilities correlate to avalanche dimension and flow regimes and we discuss the implication of such variations for structural design and hazard mapping.