8 October 2009 in Optics Express
We demonstrate a novel random laser based on a single fiber Bragg grating. A long fiber Bragg grating fabrication technique allows the insertion of a large number of randomly distributed phase errors in the structure of the grating which induces light localization. By writing such a grating in a polarisation maintaining Er-doped fiber, a random laser is demonstrated by pumping the fiber with 976 and 1480 nm pump lasers. The number of emitted modes is observed to be a function of the length of the grating and of the pump power and single-mode operation is shown to be possible. The random fiber laser shows low-threshold (~3 mW) and measured ~0.5 pm emission linewidth at a wavelength of around 1534 nm.
7 March 2013 in Optics Express
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
18 June 2014 in Optics Express
Smart phones and tablets have become ubiquitous. Corning® Gorilla® Glass is well-known to provide durability and scratch-resistance to many smart phones and other mobile devices. Using femtosecond lasers, we report high quality photonic devices, such as a temperature sensor and an authentication security system, we believe for the first time. It was found that this kind of glass is an exceptional host for three dimensional waveguides. High quality multimode waveguides are demonstrated with the lowest measured loss value (0.027 dB/cm loss) to our knowledge in any glass using fs laser inscription. High quality (0.053 dB/cm loss) single-mode waveguides have been also fabricated using a fs laser scan speed of 300 mm/s, the fastest fabrication speed reported to date. The longest high quality waveguides (up to 1m) are also reported. Experiments reveal that Gorilla Glass seems to be an ideal glass to write waveguides just below the surface, which is of great interest in sensing applications.
29 April 2014 in Optics Letters
We demonstrate for the first time to our knowledge a Raman random fiber laser (RRFL) based on a long random fiber Bragg grating (RFBG-RRFL). Unlike other recently demonstrated random fiber lasers that rely on incoherent Rayleigh scattering feedback, the present scheme uses randomly distributed phase shifts inside a fiber-meter long Bragg grating as a random coherent feedback mechanism. The laser is pumped at 1480 nm and emits a CW signal at 1576 nm. The emission spectrum is dependent on pump intensity and is shown to exhibit single and multi-mode characteristics. The RRFL shows a relatively low threshold (2.2 W) and a FWHM linewidth.
22 August 2018 in IEEE Transactions on Medical Imaging
Intra-arterial liver cancer therapies such as transarterial chemoembolization (TACE) are the preferred therapeutic approaches for advanced hepatocellular carcinoma (HCC). However, these palliative techniques are challenging for delivering therapeutic agents selectively in the tumor without real-time 3D visualization of the catheter within the hepatic arteries. The objective of this work is to develop and evaluate in preclinical tests an advanced interventional guidance platform using a distributed strain sensing device based on optical frequency domain reflectometry (OFDR) to track the tip and shape of a catheter. The scattering properties of a fiber triplet are enhanced by focusing an ultraviolet beam on these fibers, producing a fully-distributed strain sensor, which avoids interpolation errors observed with traditional shape tracking systems. A 3D roadmap of the hepatic arteries is obtained from a combined fully convolutional and residual networks trained on MR angiography, and combined with a 4D flow dynamic sequence enabling to map blood flow velocities. An anisotropic curvature matching method is proposed to map the sensed data onto pre-operative MR and using 3D ultrasound to correct for non-rigid deformations. Experiments were conducted in a controlled environment setting, as well as in both synthetic phantoms and in 5 porcine models to assess the performance for device navigation, yielding satisfactory tracking accuracy with 3D mean errors of 2.8 ± 0.9 mm. We present the first pilot study of MR-compatible UV-exposed OFDR optical fibers for non-ionizing device guidance in intra-arterial procedures, with the potential of avoiding multiple hospitalizations required to perform invasive selective chemoembolizations.
1 January 2009 in Journal of Sensors
Bulk surface Plasmons resonance devices have been researched for several decades. These devices have found a special niche as high‐sensitivity refractive index sensor in biomedical applications. Recent advances in guided wave devices are rapidly changing the capabilities of such sensors, not only increasing convenience of use but also opening opportunities due to their versatility. This paper reviews many of these devices and presents some of their salient features.