A composite scaffold with a controlled micro-pattern, nano-sized fiber matrix and surface-modified nanobioglass component was successfully prepared for skin wound healing by combining the patterning electrospinning with pulsed laser deposition strategies, and the hierarchical micro/nano structures and nano-sized bioglass in the scaffolds could synergistically improve the efficiency and re-epithelialization of wound healing.
The fabrication of bone scaffolds with interconnected porous structure, adequate mechanical properties, excellent biocompatibility and osteoinductivity presents a great challenge. Herein, a hybrid nanostructured hydroxyapatite–chitosan (HA–CS) composite scaffold has been fabricated according to the following steps: (i) the deposition of brushite–CS on a CS fibre porous scaffold by a dip-coating method; and (ii) the formation of a hybrid nanostructured HA–CS composite scaffold by the in situ conversion of brushite to HA using a bioinspired mineralization process. The hybrid HA–CS composite scaffold possesses three-dimensional (3D) interconnected pores with pore sizes of 30–80 μm. The HA rods with a length of ∼200 nm and width of ∼50 nm are perpendicularly oriented to the CS fibres. Interestingly, the abovementioned HA rods are composed of many smaller nanorods with a length of ∼40 nm and width of ∼10 nm oriented along the c-axis. The hybrid nanostructured HA–CS composite scaffold exhibits good mechanical properties with a compression strength of 9.41 ± 1.63 MPa and an elastic modulus of 0.17 ± 0.02 GPa, which are well-matched to those of trabecular bone. The influences of the hybrid HA–CS composite scaffold on cells have been investigated using human bone marrow stem cells (hBMSCs) as cell model and the CS fibre porous scaffold as the control sample. The hybrid HA–CS composite scaffold not only supports the adhesion and proliferation of hBMSCs, but also improves the osteoinductivity. The alkaline phosphatase activity and mineralization deposition on the hybrid HA–CS composite scaffold are higher than those on the CS fibre porous scaffold. Moreover, the hybrid HA–CS composite scaffold can promote the formation of new bone in rat calvarial defects as compared with the CS fibre porous scaffold. The excellent biocompatibility, osteoinductivity and mechanical properties suggest that the hybrid nanostructured HA–CS composite scaffold has great potential for bone tissue engineering.
Insufficient angiogenesis in the chronic wound of the diabetic is one of the most important causes that making the wound unable to heal itself. In this work, a cobalt-based metal–organic framework (ZIF-67) was introduced as a carrier for loading a pro-angiogenic small molecular drug (dimethyloxalylglycine, DMOG). To achieve a long-term angiogenic therapy on the diabetic wound beds, a dual cooperative controllable release system has been designed by incorporating the drug-loaded ZIF-67 nanoparticles into the micro-patterned PLLA/Gelatin nanofibrous scaffolds. The results showed that DMOG was incorporated into ZIF-67 with a high loading ratio (359.12 mg/g), and the drug-loaded ZIF-67 nanoparticles were well embedded in the circular patterned scaffold. Notably, the DMOG as well as Co ions could continuously release from the scaffold for more than 15 days. The in vitro studies showed that the released Co ions and DMOG from the micropatterned nanofibrous scaffolds could synergistically promote the proliferation, migration and tube formation of the human umbilical vein endothelial cells (HUVECs) by inducing a hypoxia response and upregulating the expression of angiogenesis-related genes such as HIF-1α, VEGF and e-NOS. Furthermore, the in vivo results demonstrated that the composite scaffolds could significantly enhance angiogenesis, collagen deposition and eliminate inflammation in the diabetes wounds. These results indicate that the cobalt-based metal–organic framework as a dual cooperative controllable release system provides a new strategy for enhancing angiogenesis and promoting diabetic wound healing.
A multifunctional composite filter combined with nanocrystalline MnO2 and a PE/PP bicomponent fiber by introducing corona charge technology has been fabricated and exhibited excellent filtration, adsorption and catalytic abilities in air pollutant abatement.