6 May 2015 in Nuclear Fusion
With WEST (Tungsten Environment in Steady State Tokamak) (Bucalossi et al 2014 Fusion Eng. Des. 89 907–12), the Tore Supra facility and team expertise (Dumont et al 2014 Plasma Phys. Control. Fusion 56 075020) is used to pave the way towards ITER divertor procurement and operation. It consists in implementing a divertor configuration and installing ITER-like actively cooled tungsten monoblocks in the Tore Supra tokamak, taking full benefit of its unique long-pulse capability. WEST is a user facility platform, open to all ITER partners. This paper describes the physics basis of WEST: the estimated heat flux on the divertor target, the planned heating schemes, the expected behaviour of the L–H threshold and of the pedestal and the potential W sources. A series of operating scenarios has been modelled, showing that ITER-relevant heat fluxes on the divertor can be achieved in WEST long pulse H-mode plasmas.
27 May 2009 in Nuclear Fusion
A 20 MW/5 GHz lower hybrid current drive (LHCD) system was initially due to be commissioned and used for the second mission of ITER, i.e. the Q = 5 steady state target. Though not part of the currently planned procurement phase, it is now under consideration for an earlier delivery. In this paper, both physics and technology conceptual designs are reviewed. Furthermore, an appropriate work plan is also developed. This work plan for design, R&D, procurement and installation of a 20 MW LHCD system on ITER follows the ITER Scientific and Technical Advisory Committee (STAC) T13-05 task instructions. It gives more details on the various scientific and technical implications of the system, without presuming on any work or procurement sharing amongst the possible ITER partnersb The LHCD system of ITER is not part of the initial cost sharing.. This document does not commit the Institutions or Domestic Agencies of the various authors in that respect.
18 November 2010 in Nuclear Fusion
The Advanced LOwer Hybrid Antenna (ALOHA) code, has been developed to improve the modelling of the coupling of lower hybrid (LH) waves from the antenna to a cold inhomogeneous plasma while keeping a fast tool. In contrast to the previous code Slow Wave ANtenna (SWAN) (that only described the interaction of the slow wave between the waveguides and the plasma in a 1D model), the equations are now solved in 2D including the contribution of both the slow and fast waves, with a low computational cost. This approach is completed either by a full-wave computation of the antenna that takes into account its detailed geometry or by a mode-matching code dedicated to multijunctions modelling, which is convenient in preliminary design phases. Moreover, ALOHA can treat more realistic scrape-off layers in front of the antenna, by using a two-layer electron density profile. The ALOHA code has been compared with experimental results from Tore Supra LH antennas of different geometries, as well as benchmarked against other LH coupling codes, with very good results. Once validated, ALOHA has been used as a support for the design of COMPASS and ITER LH antennas and has shown to be a fast and reliable tool for LH antenna design.
9 June 2011 in Nuclear Fusion
A detailed study of lower hybrid current drive (LHCD) in ITER is provided, focusing on the wave propagation and current drive mechanisms. A combination of ray-tracing and Fokker–Planck calculations are presented for various plasma scenarios, wave frequency and polarization. The dependence of the driven current and the location of power deposition upon the coupled wave spectrum is systematically determined, in order to set objectives for the antenna design. The respective effects of finite-power levels, magnetic trapping, and detailed antenna spectra are accounted for and quantitatively estimated. The sensitivity of LHCD to density and temperature profiles is calculated. From the simulation results, an optimum value for the parallel index of refraction is proposed as a compromise between efficiency and robustness with respect to those profile variations. The corresponding current drive efficiency is found to be similar for the two frequencies generally considered for ITER, f = 3.7 GHz and f = 5.0 GHz.
1 September 2012 in Physics of Plasmas
A minimal two-field fluid approach is followed to describe the radio-frequency (RF) wave propagation in the bounded scrape-off layer plasma of magnetic fusion devices self-consistently with direct current (DC) biasing of this plasma. The RF and DC parts are coupled by non-linear RF and DC sheath boundary conditions at both ends of open magnetic field lines. The physical model is studied within a simplified framework featuring slow wave (SW) only and lateral walls normal to the straight confinement magnetic field. The possibility is however kept to excite the system by any realistic 2D RF field map imposed at the outer boundary of the simulation domain. The self-consistent RF + DC system is solved explicitly in the asymptotic limit when the width of the sheaths gets very large, for several configurations of the RF excitation and of the target plasma. In the case of 3D parallelepipedic geometry, semi-analytical results are proposed in terms of asymptotic waveguide eigenmodes that can easily be implemented numerically. The validity of the asymptotic treatment is discussed and is illustrated by numerical tests against a quantitative criterion expressed from the simulation parameters. Iterative improvement of the solution from the asymptotic result is also outlined. Throughout the resolution, key physical properties of the solution are presented. The radial penetration of the RF sheath voltages along lateral walls at both ends of the open magnetic field lines can be far deeper than the skin depth characteristic of the SW evanescence. This is interpreted in terms of sheath-plasma wave excitation. Therefore, the proper choice of the inner boundary location is discussed as well as the appropriate boundary conditions to apply there. The asymptotic scaling of various quantities with the amplitude of the input RF excitation is established.
30 September 2010 in Nuclear Fusion
A new ITER-relevant lower hybrid current drive (LHCD) launcher, based on the passive-active-multijunction (PAM) concept, was brought into operation on the Tore Supra tokamak in autumn 2009. The PAM launcher concept was designed in view of ITER to allow efficient cooling of the waveguides, as required for long pulse operation. In addition, it offers low power reflection close to the cut-off density, which is very attractive for ITER, where the large distance between the plasma and the wall may bring the density in front of the launcher to low values. The first experimental campaign on Tore Supra has shown extremely encouraging results in terms of reflected power level and power handling. Power reflection coefficient <2% is obtained at low density in front of the launcher, i.e. close to the cut-off density, and very good agreement between the experimental results and the coupling code predictions is obtained. Long pulse operation at ITER-relevant power density has been demonstrated. The maximum power and energy reached so far is 2.7 MW during 78 s, corresponding to a power density of 25 MW m−2, i.e. its design value at f = 3.7 GHz. In addition, 2.7 MW has been coupled at a plasma–launcher distance of 10 cm, with a power reflection coefficient <2%. Finally, full non-inductive discharges have been sustained for 50 s with the PAM.