6 September 2010 in Philosophical Magazine
The stability of Co2Zn11 and Al8V5 gamma-brasses, both of which are composed of a transition metal element and polyvalent elements Zn or Al, can be discussed in terms of d-states-mediated Fermi surface–Brillouin zone (FsBz) interactions in the context of first-principles full-potential linearised augmented plane wave (FLAPW) band calculations. A FsBz-induced pseudogap is revealed in the FLAPW-Fourier spectrum, though it is hidden behind a much larger d-band in the total density of states. The stability range of three families of complex metallic alloys (CMAs) that include gamma-brasses, RT-, MI- and Tsai-type 1/1-1/1-1/1 approximants and 2/1-2/1-2/1 approximant, each of which is characterised by = 18, 50 and 125, respectively, can be well scaled in terms of the number of electrons per unit cell (e/uc) given by the product of the number of atoms per unit cell and the e/a value determined by the Hume-Rothery plot on the basis of the FLAPW-Fourier method. This is taken as the evidence for the justification of the Hume-Rothery stabilisation mechanism for all these CMAs having a pseudogap at the Fermi level.
1 January 2009 in Zeitschrift für Kristallographie - Crystalline Materials
By using the FLAPW-Fourier method, we could determine the e/a value for Al–Cu–TM–Si (TM = Fe and Ru) 1/1 – 1/1 – 1/1 approximants and several B2 compounds including CuZn, NiZn, NiAl, MnZn, and AlMg. The NiAl, NiZn and MnZn B2-compounds involving the transition metal element as a partner element are found to be no longer regarded as the 3/2 electron compounds. Moreover, we found that the e/a value is not uniquely assigned to a given transition metal element but depends on its surrounding environments. Hence, it is difficult to use it as a universal parameter in an alloy design.
19 November 2022 in Scientific Reports
The effects of multiple piers with 3D geometries on water levels during floods, as well as riverbed fluctuations and local scour after floods were examined via hydraulic model experiments. The Kintaikyo Bridge in Japan, a world-famous historical triple-wooden-arch bridge, was modeled at a scale of approximately 1/276. The number of model piers was set to four, as in the real bridge, and they were 3D printed and installed in the sand layer of an open channel. To provide adequate information on the pier installation conditions and hydraulic response, four cases were studied in the experiments, primarily considering present pier conditions; the previous conditions of the Kintaikyo Bridge were also considered. The experimental conditions in these four cases depended on whether foundations were present, the piers were skewed against the flow center, and the shape was spindle or similar to that of the present case. In the current bridge condition where foundations are present and there is no skew, water level rise, riverbed fluctuation, and local scour were suppressed. Furthermore, the statistical analysis of the results suggested that riverbed fluctuations are more stable after flooding. The two piers with foundations had smaller scour areas than those without. Further, those with foundations generally had lower mean scour at the pier perimeters. Regarding those without foundations, there were no differences in riverbed fluctuations or local scour due to the skewed pier angle. In addition, the representative length of the pier with a 3D geometry was determined by dividing the projected area of the pier below the initial sand surface in the main flow direction by the pier height, and the relationship between the Froude number or the mean water depth and the maximum scour depth was investigated.
1 June 1998 in Journal of Obstetrics and Gynaecology Research
26 August 2021 in Heritage Science
The Kintaikyo Bridge, with its elegant wooden arches, has a unique pier shape and continues to be loved by residents and visitors alike. Although this bridge is an active footbridge and an important landscape element along with the Nishikigawa River and its river beach, the rationality or irrationality of the shape of its piers remains unknown. This paper is intended to clarify the river engineering characteristics of the piers for the first time by conducting 1/129 scale hydraulic model experiments. The shapes tested were a perfect spindle shape (which has been adopted as a common theory for many years) and a reconstructed current shape based on the spindle shape, and for comparison, an oval and a non-regular hexagon shape with the same width and area. The current shape, along with the spindle shape, suppressed the water level rise around the pier more than the others. As for the riverbed fluctuation, the current shape slightly increased the scour more than the others, but it also maximized the sedimentation around the scoured part. In other words, the current shape has the potential to facilitate the procurement of sediment for post-flood restoration. In addition, the current shape overwhelmingly reduced the statistical dispersion associated with the experiment, suggesting that it stabilizes the trend of riverbed fluctuation even during actual floods. Based on the results, the future conservation of the Kintaikyo Bridge was also discussed.